Kitchen Cooking Thermometer and Timer CT-5 with LCD display countdown timer

CT-5 Digital Thermometer and Timer

Technical Parameter:

Temperature measuring range: -50 to 300deg.C, (-58F to 572F)

Accuracy: +/-1deg.C (-20 to 80deg.C), within +/-2deg.C at others,

Resolution: 0.1

C/F switch

Alarm Resolution: 1Deg.C

Timer Range: 99hrs 59mins

Timer Resolution: 1Min

Temperature Alarm Set:

1. Press [SET], display MAX alarm-temperature(HI)

2. Press [UP] or [DOWN] to set the High-Alarm Temperature value

3. Press the [SET] again, display MIN Alarm-Temperature(LO)

4. Press [UP] or [DOWN] to set the Low-Alarm Temperature value.

5. Press [SET] again to finish the setting.

6. When setting, Press [UP] or [DOWN] for 3 seconds, the value will change automatically.

7. When measured temperature exceeds the set alarm temperature range, it will alarm

8. Press any key to cancel alarm. ?HI? or ?LO? will flash till the measured temperature back to the set alarm temperature range.

MAX/MIN Temperature display:

1. Press [MAX/MIN] to display the MAX temperature, ?MAX? will flash

2. Press [MAX/MIN] again to display the MIN temperature, ?MIN? will flash

3. Then Press [MAX/MIN] again, back to normal display

4. Press [MAX/MIN] for 3 seconds, display ?888.8?, to clear MAX and MIN value

Data Hold

1. Press [HOLD] to hold the measuring temperature, and the ?HOLD? will flash on.

2. Press [HOLD] again to normal display

Timer Set:

1. Press [HOUR] to set countdown hour value, press [MINUTE] to set countdown minute value

2. When countdown, [:] on the LCD screen will be flashing all the time till countdown finish.

3. When countdown, press [START/STOP] countdown stop; press [START/STOP] again, countdown start.

4. Press [HOUR] and [MINUTE] together to clear the set time.

5. When countdown to 00:00, alarm will sound, [:] will stop flash, press any key to cancel alarm.

6. Press [START/STOP] for 3 seconds, to display the set countdown time.

Note:

During countdown, press [START/STOP] to stop it. Then press [START/STOP] for 3S to display the set countdown time. Then press [START/STOP] again, countdown will start from the beginning value.

For example: Set countdown time value 5 minutes, countdown already goes to 2 minutes.

*Press [START/STOP] to stop countdown,

*press [START/STOP] for 3 seconds to display set countdown time 5 minutes,

*Then press [START/STOP] again to start countdown from the beginning 5 minutes