1.0.6mm BGA Lead Solder ball 2.5W
2.0.6mm Lead-free tin ball available
3.Welding ball,tin ball for bga
4.Soldering ball with lead for bga repairing work
5.other size also available
6.inquriy what you need,contact us directly :)
0.6mm BGA Lead Solder ball 2.5W* 1pc
1, when used, the amount of time, remove the need to avoid a take out too much.
2, used ball, use the containers were kept.
3, when the ball again, before use, once again confirmed the reliability of use.
4, the solder balls to use, do not vigorously shaking or strong shocks.
5, when the flux and solder ball placement should not be too much or too little.
1, the storage conditions was 25+- 10 degree, relative humidity 60% RH below 12-month shelf life
2, using the best temperature and humidity environment with the same storage conditions.
3, save the place by the solder ball to be to avoid vibration, moisture, by the light irradiation.
4, will be filled by nitrogen gas bottle, not the solder ball being proposed should be kept in the original bottle, ball, and covered both inside and outside to lock.
5, due to vibration, moisture, caused by light exposure may reduce the quality of solder balls.
6, not yet, please try not to use the ball to open the lid to prevent air into the cause of solder ball oxidation.
0.5mm BGA Lead-free Tin ball/Solder ball 2.5WUS$ 8.42 - US$ 12.63/piece
0.6mm BGA Lead-free Tin ball/Solder ball 25000US$ 7.37 - US$ 13.68/piece
0.76mm BGA Lead-free Tin ball/Solder ball 2.5W,M13US$ 8.95 - US$ 13.16/piece
Euramerican export new style: Single Frame BGA Reballing Station + 5pcs StencilsUS$ 30.53 - US$ 34.74/piece
G86-630-A2,GF-GO7400-N-A3,G98-920-U2 Directly heated BGA StencilUS$ 6.84 - US$ 7.85/piece
183pcs + Freeshipping BGA Directly Heated Stencils Reballing ReworkUS$ 65.26 - US$ 69.47/piece
BGA Memory Stencil Kit (DDR1+DDR2+DDR3=3pcs)US$ 6.84 - US$ 9.53/piece
BGA Reballing Station + Hex wrench for Direct heating StencilsUS$ 24.21 - US$ 28.95/piece