1000w grid tie power inverter with solar panel or wind generator,90V-140/180~260VAC CE certificate !grid tie inverter
Seller Promise:
1000w grid tie power inverter for solar panel and wind turbine, CE certificate ! ROHS certificate ! brand NEW !
Description:
THE AC socket can only be connected with Grid, the DC socket can be connected with battery or directly to solar panel !
Angle with high precision auto-detect if it was held 0 Total
Step directly modulated high-frequency phase
Pure sine wave output
Solar luminosity power automatically adapt
Automatic power locking
Maximum Power Point Tracking(MPPT)
Automatically adapt to different load power factor
Constant current, constant-power design
Power grid automatically shut down when the output is faulty
Current limit protection
Schmitt trigger SPWM Generator(Output Pure sine wave)
Straight-line with the design
Multiple stack(Use of multiple machines in parallel)
Design of high frequency and high conversion rate
 |  |
Main Technical Specification
Grid-inverter Type | 1000W |
Recommended Maximum PV Power | Ppv=1250Wp |
DC Maximum Input Power | PDC.max=1200W |
DC Maximum Voltage | VpvDC30.2VDC |
PV MPPT DC Voltage Range | Vpv 10.5V~28VDC |
Peak Inverter Efficiency | max>94% |
MPPT Efficiency | 99% |
PV Maximum Input Current | Ipv.max65A |
AC Rating Output Power | 1000W AC |
AC Maximum Output Power | 1000W AC |
Reverse Polarity Protection | Fuse |
AC Normal Voltage Range | 90V-140/180~260VAC |
AC Frequency | 45Hz~53Hz/55Hz~63Hz |
Inverter Output Current Total Harmonic Distortion | THDIAC <5% |
Phaseshift | <1% |
Island Effect Protection | VAC;f AC |
Inverter Output Shorting Protection | Current Limiting |
Disaplay | LED |
Standby Power Consumption | <8W |
Nighttime Power Consumption | <1W |
Ambient Temperature Range | -250C~600C |
Ambient Humidity | 0~99%(Indoor Type Design) |
Waterproof | Indoor Type Design |
Eelectromagnetic Compatibility | EN50081.part1 EN50082.part1 |
Power Network Disturbance | EN61000-3-2 |
Power Network Detection | DIN VDE 126 |
Main feature
Weight | 2.0kg |
Dimension (L x W x H) | 31 x 16.5 x5.5cm |
Mounting | Wall Mount at base |
AC Cable Length | 1.8m |
Cooling | Convection cooled with fan |
Display | 1 Red and 1 Green LED |
User Guide
Installation & Connection
Red Terminal: to connect positive pole of DC; Black Terminal: to connect negative pole of DC.AC Socket: to connect grid.
Switch: Power Switch, after the proper connecting, turn on, Inverter start working.
DC Input limits:
Operating Voltage range: 10.5V to 28V
Maximum input Voltage: 28V
Solar Panel: 30W minimum, only use PV panels with maximum power voltage at 17.5V.
Can ONLY connect panels in parallel. DO NOT connect them in series!
Wind Turbine: Rated output voltage 24VDC, Maximum voltage 28VDC
AC Output:
Grid Connection:
220V AC version: 170V-250V, 50Hz
110V AC version: 90V-140V, 60Hz
Island Protection: Automatically disconnect when the grid is tripped
Maximum quantity of Pure Sine-wave Inverters allowed on a main circuit: No limited
LED Indicators:
Red LED on: Input DC voltage is too high or low (less than 10.5V or more than 28V)
Red LED on: Over Heat protection once over 700C, automatic restart after cooling down for about 2-10 minutes.
Red LED on: Grid blackout fault
Green LED Flashing: Output power in the state of regulation.
Green LED on continuously: Inverter works normally, constantly max. output power.
international shipping note
1. Taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s r esponsiblity
2. please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. thank you for your unserstanding
shipping
We ship it by DHL, EMS, UPS express, there will be a tracking number so that you can track it, it will take 3-7 days to arrive at your country. some remote adress maybe need a little long time
Warranty and return policy
our produc is CE and ROHS stardard, which is a high quality, we supply the 12 month Warranty, 15 days returning after you receive the products, we will refund all the money if we received a good condition product,the buyer is responsible for the returning transporation cost, thank you !
