12/24V 20/30A RoHS CE WS-MPPT30 Solar charger

Product Description

12/24V 20/30A 

Solar charger

RoHS CE WS-MPPT30WS-MPPT30 30A solar controller (also known as WELLSEE intelligent solar charge controller, solar charge controller, PV controller) applies in solar energy photovoltaic systems, which coordinates the working of solar panels, batteries and loads..It can intelligently regulate the working voltage of solar panels, letting the solar panels always work at Maximum Power Point of V-A curve. Compared with ordinary solar controller, this MPPT controller can increase the efficiency of PV modules by 10%-30%. WELLSEE ” WS-MPPT” solar controllers 10A--60A include 12V series, 24V series and 48V series. 

MPPT advantage

Maximum Power Point Tracking (MPPT in short) system is a system which allows PV panels to outputs more Power by adjusting working condition of the electrical module. In Figure1  A indicates that the ordinary controller, which makes PV battery work on 12V ,only outputs a power point of 53W (a general power point), B indicates that MPPT controller makes PV battery always work at the maximum power point, thus outputs the power point of 75W (the maximum power point). 

Product features

1.Applying with various types of batteries It is mainly suitable for Pb acid and gel batteries.

2.Automatic recognition of input voltage

3.It can distinguish DC12 or DC24V automatically

4.Micro processing controller Pulse Modulation Wide-frequency(PWM)charge.

5.Temperature sensors for charging the battery in compensation

6.Setting the voltage of low voltage cut-off/resuming connection of the DC output of the load port

7.Protective circuit of PV from reverse-charging

8.CPU control

9.Batteries stop discharge SOC Sets up

10.Professional numeration of SOC

11.Loads turning on comeback setups.

12.Overload protection (automatic comeback)

13.Overcharge protection

14.Short circuit protection (automatic comeback)

15.Thunder protection

16.Reversed discharge protection

17.Conversed polarity connection protection (automatic comeback)

18.undervoltage protection

Notice

1.Be sure to connect correctly the positive and negative poles of the battery firstly ,the load ,and lastly solar panel .Don’t reverse.

2.Please check the rated voltage of solar panels. batteries, and load before connecting, Make sure their rated voltage should be all 12V(or 24V,or 48V)

3.Pay more attention to + and - poles of solar panels, batteries, controller and loads during the process of connection.

4.The rated current of solar panels and loads must be lower than the controller .

MPPT principle

The maximum power point is mainly affected by the ambient temperature and the intensity of sunshine. The intensity of sunshine being constant, the maximum output power decreases with the rise of the temperature. The temperature being constant, when the sunshine intensifies, the open circuit voltage of PV battery basically keeps unchanged. But the short circuit current increases substantially, thus the maximum output power increases substantially. 

This WS-MPPT solar controller can intelligently regulate the working voltage of solar panels, letting the solar panels always work at Maximum Power Point of V-A curve. Compared with ordinary solar controller, this MPPT controller can increase the efficiency of PV modules by about 30%. 

However, due to many different factors, such as the difference in solar panel making, the change the Sun illuminance, change in temperature, the efficiency of the controller etc., the actually available increased rate is 10%-30%. 

 TECHNICAL INDEX 

 Product photo

.