13.56MHZ USB Contactless Smart Card Reader wiht RFID card serial number

Product Description

 Contactless Smart Card Reader(only reader)

USB_201 Smart card reader(only reader), which adopts microelectronics RF receiver module and the embedded microcontroller, combined with efficient decoding algorithm and advanced data processing technique. The card reader as a computer external input device, can read out the RFID card serial number and through the USB or PS2 port output to the computer, equivalent to the automatic keyboard input, can be used" WORD"," NOTEPAD" software records card number, reliable performance, convenient operation. Can use this record number, derived from more management function.

technical parameters:

Support cards: support the Mifare standard

frequency: 13.56MHz compatible card

Card reading distance: more than 70mm card

reading time : less than 100ms

Power supply mode: USB or PS2

output interface: USB or PS2

inches: 110 x 80 x 30mm

installation instructions

Directly into a computer USB port or PS2 port, the card reader. green light flashing two times, prompted to install successfully used commonly used" WORD"," NOTEPAD" wait for software testing.

Open" WORD" or" NOTEPAD" in the state of input card, ringing sound, lights flash once," WORD" or" NOTEPAD" appeared in a string of numbers and automatically enter, said system is normal, the number is the desired radio frequency card serial number.

the matters needing attention and simple troubleshooting

1, the card reader is installed to facilitate credit card operation position, while avoiding near the display, because the radiation monitors may interfere with the normal operation of the card reader.

2, the card is not recommended to operate a mouse, to avoid transferring data error.

3, a card reader and computer communication between the cable length should be less than 5 meters.

4, avoid in the critical state (just to read the card card reading distance ).

5, card has no reaction: interface is plugged; RF card is compatible with the RFID card; RF card is bad; whether RF card in the card reading range.

6, transfer data error: the swipe of a card if the operation of the mouse; whether in strong electromagnetic interference in the environment of a card; the card reader and computer communication between the cable is too long; is in a critical state card.

pictures: