1pcs With 16dBi MIMO antenna 250mW 5Ghz 11n 300M(2T2R) Atheros AR9280/AR7240 Outdoor wireless ap wireless bridge wireless cpe
Seller Promise:
Get US $5.00 off for single orders greater than US $200.00. No upper limit to discount.
When you purchase more than one item, please add them to the shopping cart to get the discount.
Time remaining for promotion: 12d 2h 44m 33s
500mW high power 2.4Ghz b/g/n 150M Atheros AR9285/AR7240 Outdoor CPE/AP/Bridge wireless ap wireless bridge wireless cpe
Key Features
IEEE 802.11a/n compliant
Up to 40dB EIRP output power
WPA / WPA2 wireless security
RoHS compliant
IP55 rated enclosure
Adjustable output power
Chipset: Atheros AR9002 Family
o CPU: Atheros AR7240
o RF: Atheros AR9280
Software selectable 2x2 MIMO RF output
o Integrated 16dBi antenna
o 2 x SMA-R female connectors
Chipset Atheros AR9280/AR7240
Transmit Power 24 dBm
Receive Sensitivity -89 dBm @ 6 Mbps data rate
Antenna 16 dBi dual polarity panel antenna
(Software selectable) 2 x SMA-R female antenna connectors
Radio Specification | ||||||||||
Chipset Solution | RF: Atheros AR9280 | CPU: AR7240 | |||||||||
Antenna – Default configuration | 16dBi integrated directional antenna (dual polarity) | |||||||||
External RF connector | 2 x sma-r connectors | |||||||||
Antenna Configuration | 2 * 2 (2 Tx, 2 Rx) | |||||||||
Memory | Flash | DDR | ||||||||
8MB | 32MB | |||||||||
Modulation | OFDM: BPSK, QPSK, 16-QAM, 64-QAM / DSSS: DBPSK, DQPSK, CCK | |||||||||
Available Data Rates (Mbps) | IEEE 802.11b – 11, 5.5, 2, 1 | |||||||||
IEEE 802.11g – 54, 48, 36, 24, 18, 12, 9, 6 |
| |||||||||
IEEE 802.11n (draft) – 135, 130, 121.5, 117, 108, 104, 81, 78, 65, 58.5, 54, 53, 40.5, 39, 27, 26, 19.5, 13.5, 13, 6.5, 6 |
| |||||||||
RF Frequency | USA (FCC) | Europe (ETSI) | ||||||||
5.725GHz – 5.825GHz | 5.470-5.725GHz / 5.725-5.825Ghz |
| ||||||||
Average RF Output Power (± 1.5dB)* *actual power may vary based on regulatory requirements | 802.11a | 6-24Mbps | 24 ± 1.5dBm | |||||||
36Mbps | 23 ± 1.5dBm |
| ||||||||
48Mbps | 22 ± 1.5dBm |
| ||||||||
54Mbps | 21 ± 1.5dBm |
| ||||||||
802.11n | HT20 | MCS 0 | 23± 1.5dBm | |||||||
MCS 15 | 20 ± 1.5dBm | |||||||||
Receiver Sensitivity | 802.11a | 802.11n | ||||||||
6-24Mbps: ≤ -94dBm | 54Mbps: ≤ -73dBm | HT20/MSC0 ≤ -96dBm | ||||||||
Regulatory Compliance | FCC Part 15, CE EN300 328, EN301 489-1/17, EN60950 | |||||||||
Standards Compliance | IEEE 8802.11an, WiFi certificate | |||||||||
Physical Specification | |
Dimension | 111mm(l)x256mm(w)x48mm(h) |
Weight | TBD |
Enclosure | IP65 Plastic |
Electrical Specification | |
Reset Button | Reset to factory default |
Power Requirements | 12VDC @ 1 A (switching) |
PoE | Passive 12V PoE |
Power Consumption | ≤ 900mA @ 12VDC |
LED Definition | Power: Green on = system on, Green off = system off, Amber blinking = Initializing |
LAN: Off = no Ethernet, On = connection established, Blinking = sending, receiving | |
WLAN (AP Mode) Off = disabled, On = WLAN enabled, Blinking = WLAN activity | |
WLAN (Client Mode) All Off = WLAN disabled, Green blinking = good connection Yellow blinking = Acceptable quality, Red blinking = poor connection quality | |
Environmental Specification | |
Operating Temperature | -20°C ~ 70°C |
Storage Temperature | -30°C ~ 80°C |
Operating Humidity (non-condensing) | 5 to 95 % RH |
Green | RoHs Compliant |
Firmware Specification | |||
Function | Detail | Default setting | |
Web Language | English | English | |
Firmware Upgrade Method | Web upgrade via Ethernet or Wireless port / TFTP upgrade via Etherent port | ||
Status | Information | ||
Statistics for Wireless and Ethernet |
| ||
Connection status |
| ||
System | Basic Settings | Device Name | APXXXXXX |
Country/Domain | USA FCC | ||
Time NTP | Disable | ||
IP Settings | IP Address assignment (DHCP/Manual) | DHCP / 192.168.1.1, DHCP is the default, however when server is not present the unit reverts to 192.168.1.1 | |
RADIUS | Accounting and Authentication | Disable | |
Wireless | Basic Wireless Settings | Operation mode (AP / CPE) | AP |
AP mode functions |
| ||
1. SSID | Wireless | ||
2. Hide SSID (enable/disable) | Disable | ||
3. Channel selection | 149 | ||
4. Client limitations (0~32) | 32 | ||
5. Wireless client isolation (enable/disable) | Disable | ||
6. Tx flow control (1~2400*64Kbps) | 1687 | ||
Client mode functions |
| ||
1. SSID | ANY | ||
2. CPE with Multi-Client support | Enable | ||
3. Tx Flow control by AP (enable/disable) | Disable | ||
Wireless mode | 802.11a/n
| ||
Data Rate Selection 6-54Mbps & MCS0-7 | Best
| ||
Security Settings | Open system Shared Key (64/128/152-bits WEP) 802.1X only WPA WPA2 WPA-PSK(TKIP) WPA2-PSK(AES) | Open System | |
Access Control | Allow / Deny STA list STA Flow control for allowed stations | Disable | |
