2000M Single Channel AC 110V 220V Output Wireless Remote Control Transmitter Receiver

Product Description

Remote Control System with 1 x Receiver and 1 x Transmitter | 1 Channel | 315MHz/433MHz
 

 Control Lights, Motors, Fans, electrically operated Doors / Locks / Windows / Blinds / Cars or Other Appliances with voltage AC110~240V or DC0~28V.

Feature:
Wireless control, easy to install
You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless signal can pass through walls, floors and doors.

With characteristics of reverse power protection and over current protection
Audible / visual indication
Use microcontroller model of EM78P156, an 8-bit microprocessor designed and developed with low-power and high-speed CMOS technology.
Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
One/several transmitters can control one/several receivers simultaneously.
If you use two or more receivers in the same place, you can set them with different codes.

Working distance of transmitter and receiver with external extend antenna: 2000M/6000ft (theoretically).
Transmitting Frequency: 315MHz as default, but if you want the frequence 433MHz, please feel free to contact us before ordering.

Receiver:
Model No.: S1X-AC220-ANT2
Channel: 1 CH
Control Modes: Latched, Momentary, Toggle
Coding Type: Fixed code
Coding Setting: By learning
Power Supply (Operating Voltage): AC110~240V (S1X-AC220-ANT2) as default, but if you want the power supply AC100~240V (S1X-AC110-ANT2), please feel free to contact us before ordering.
Working Voltage Range of Relay: AC110~240V or DC0~28V
PCB Size: 75mm x 54mm x 22mm
Case Size: 79mm x 58mm x 36mm
Maximum Power: 10A/each channel

External Extend Antenna:
Frequency Range: 300~450MHz
Impedance: 50Ω
Antenna Length: 15cm
Cable Length: 150cm
Weight: 35g
Anti-interference, waterproof, shielded wire set inside
Magnetic stand design for easy to install

Transmitter:
Model No.: CB-2
Channel: 2 CH
Remote Control Distance: 1000m/3000ft (theoretically)
Encode: Fixed code by soldering
Unit Size: 135mm x 42mm x 25mm
Power Supply: 1 x 6F22-9V battery (included, can be used for 12 months)

Utilisation:
Setting control mode Toggle: Only connect Jumper-2.
Press big button: Turn on the relay, terminal OUT outputs AC power.
Press big button again: Turn off the relay, terminal OUT no output.
Setting control mode Momentary: Only connect Jumper-1.
Press and hold big button: Turn on the relay, terminal OUT outputs AC power.
Release big button: Turn off the relay, terminal OUT no output.
Setting control mode Latched: Do not connect Jumper.
Press big button: Turn on the relay, terminal OUT outputs AC power.
Press small button: Turn off the relay, terminal OUT no output..

Package Include:
1 x Receiver: S1X-AC220-ANT2 (1 Channel / 3 Control Modes / AC220V)
1 x Transmitter: CB-2
1 x User Manual

More Pictures: