Operating voltage: 12V (recommended LED light bar dedicated power supply, such as the use of other low-quality power supply burned out light, we are not responsible)
Light Introduction: 17.2W / m are white, warm white (the default is white)
Beam angle: 45 degrees angle of light, within 2 meters can be customized to any size.
Dimensions: 72 beads / m
Material: 5050 SMD aluminum plate (the default is V-90 aluminum silver case, note: different models for the other case, described in the order).
Installation: fixed installation
Installation instructions Notes:
1: Install the required materials for the LED light bar, the DC power cable (use the thick copper wire) and glass glue.
II: DC power supply wiring installation, L, N AC connection, regardless of positive and negative, + V then positive,-V (COM) then negative, then positive and negative note this can not be reversed.
III: Connect the wire should be taken into account power consumption, the proposed light of the DC power supply does not exceed 80% of rated power, 72 bead counter light bar is 17.2 watts per meter. For example: 10 m 72 beads desk lamp is 17.2 watts of power per meter X10 m = 172 watts of DC power required will need to choose at (172 divided by 0.8) = 215 watts or more.
IV: DC Power Terminal: DC power supply wiring methods are mainly two kinds, one is connected in series, one is parallel. Another recommended series of length no more than 3 meters, if more than 3 meters from the re-wiring the DC power supply terminal, otherwise it will not appear in front of bright light behind the case.
V: Install before:
1 Please try the power supply and each strip to determine not damaged during transport;
(2) Power calculations to determine the number of meters connected to a power strip. Calculated: the power of light per meter of length of light X ÷ 0.8, the calculation of series and parallel, like;
3 to determine the alignment program to ensure the shortest connecting wires, wiring the most simple;
4 to start the installation, the aluminum tank can stick to the inside of the counter. The installation process to be careful to avoid pulling off the lamp wires.
VI: Common problems and solutions:
1 does not light, check the circuit is connected, is bad, whether light of the positive and negative reversed.
2 Light intensity is significantly lower, check the power light of the rated power is less than the power, or connect wires too small, resulting in excessive power consumption of connected wires.
3 LED lights behind the bar significantly higher than the previous series, please check the length is more than 3 meters.
VII: light color and is ideal for:
1, Warm White: gold, jade, colored gemstones
2, are white: silver, white, amber, clothing, leather goods
3, Cool White: diamonds, crystal, watches
Please indicate the selected color in order
We do our best to serve our each customer the best that we can.
We will refund you for items returned within 7 days of you receiving them, for any reason. A full refund will be given if items are returned in their original condition.
Merchandise which is damaged or missing components is not refundable.
Buyers are responsible for return shipping with proper packaging.
On receiving items, we will refund you immediately.
We provide 1 month replacement and 12 months maintenance warranties. Items can be replaced during the first month or maintained for the first year.
Buyers are only responsible for the return shipping fees for warranty items.(In most cases, buyer will only have to return the problem components rather than the entire package.).
Before returning items, please make sure you get our (the seller’s) return address, and write “gift” on the delivery detail sheet. Please use regular postal service and send us the tracking number. As soon as we receive the items, we will repair or exchange them ASAP.