7.4 11.1 14.8 22.2 V Digital Balancer B6 Li-Po RC Battery Charger with fan B6V8 for RC car airplane helicopter boat B6 V8
- Processing Time:
- Shiping out within 3 days
Smarter Shopping, Better Living!
Get US $5.00 off for single orders greater than US $99.00. No upper limit to discount.
When you purchase more than one item, please add them to the shopping cart to get the discount.
Time remaining for promotion: 3d 1h 12m 49s
DC 11~18 volts
0.1 to 5.0A
0.1 to 1.0A
No. of cycle
1 to 5 times
Battery data memory
up to 5 data
User's setting-up parameters
Lithium battery voltage type
LiIo:3.6V, LiPo:3.7V, LiFe:3.3V
NiCd Delta-peak voltage sensitivity
5 to 20mV
NiMH Delta-peak voltage sensitivity
5 to 20mV
Battery temperature cut-off
20 to 80C or OFF
Waste time between charge/discharge
1 to 60 min.
Trickle charge mode
ON/OFF, up to 200mA
Integral timer limit for safety
10 to 720 min.or OFF
Maximum charging capacity limit for safety
10 to 9990mAh or OFF
Key beep and buzzer sound
Input power low alert
10 to 11V
Quantity: 1 pcs ( 1 pcs charger, with many plugs and cables, all you can see in the frist picture)
Package: Colorful carton box.
100% brand new!
Optimized operating software
This charger features the so-called AUTO function that set the feeding current during the process of charging or discharging. Especially for Lithium batteries, it can prevent to overcharging which may lead to an explosion due to the user's fault. It can disconnect the circuit automatically and alarm once detecting any malfunction. All the programs of this product were controlled through two way linkage and communication, to achieve the maximum safety and minimize the trouble. All the settings can be configured by users.
Internal independent Lithium battery balancer
This employs an individual-cell-voltage balancer. It isn't necessary to connect an external balancer for balance charging.
Balancing individual cells battery discharging
During the process of discharging, B6 can monitor and balance each cell of the battery individually. Error message will be indicated and the process will be ended automatically if the voltage of any single one cell is abnormal.
Adaptable to various type of lithium battery
This charger adaptable to various types of Lithium batteries, such as Li-ion, LiPo and the new LiFe series of batteries.
Fast and storage mode of lithium battery
Purposes to charge Lithium battery variess, 'fast' charge reduce the duration of charging, whereas 'store' state can control the final voltage of your battery, so as to store for a long time and protect useful time of the battery.
Delta-peak sensitivity: The automatic charge termination program based on the principle of the Delta-peak voltage detection. When the battery's voltage exceeds the threshold, the process will be terminated automatically.
Automatic charging current limit
You can set up the upper limit of the charging current when charging your NiCd or NiMH battery; it is useful for the NiMH battery of low impedance and capacity in the 'AUTO' charging mode.
The charging capacity is always calculated as the charging current multiplied by time. If the charging capacity exceeds the limit, the process will be terminated automatically when you set the maximum value.
The battery's internal chemical reaction will cause the temperature of the battery to rise. If the temperature limit is reached, the process will be terminated.
Processing time limit
You can also limit the maximum process time to avoid any possible defect.
Input power monitoring
To protect the car battery used as DC input power from being damaged, its voltage keeps being monitored. If it drops below the lower limit, the process will be ended automatically
Data store / load
The maximum five batteries's data can be stored for users