Smarter Shopping, Better Living!
Get US $10.00 off for single orders greater than US $200.00. No upper limit to discount.
When you purchase more than one item, please add them to the shopping cart to get the discount.
Time remaining for promotion: 8d 12h 32m 2s
Feature
2.4GHz Wireless 7.0'' LCD monitor with remote control
380TV lines clear picture display
Built-in IR lights for night vision range
Weather-proof design for outdoor usage
4-channel available to avoid interference
Built-in microphone for audio monitoring
Min. 100m transmission distance without blocks
Channel scan and channel skip for multi-camera usage.
Operation Introduction
1 Open the packaging box,take out the receiver, adjust the support post behind the receiver to a proper position, and put the receiver unit stably. Then install the antenna correctly.
2 Power the machine unit: Connect the input terminal of the receiver power adapter to AC 110~220V, other terminal to DC IN socket of the receiver. Slip the power switch to ON position, then the red power LED lights, the receiver starts up.
3 Power on the camera;connect the camera power adapter with camera, and put it on the correct position. Note: metal shield will loss the signal.
4 Channel selection: press the channel selection key, and the LED display will show the number from 1 to 4, the number means the relevant channel. As select the correct frequency channel, the screen will display the relative signal from the camera, also can adjust the frequency channel by the remote control.
5 Cycle frequency initialization: press the channel selection key for 3 seconds, the LED will display the number from 1 to 4 in rurn, and every number will keep 5 seconds, it is fit for more cameras working in the same time. Also can initialize the function by the remote control.
6 Receive more clear video: Trying to adjust antenna direction can get more clear video.
7 Adjust voice volume and video brightness on the relative side knob.
8 Video and audio output: Connect the A/V cable to show the video and audio
9 Video and audio input: press the channel selection key for a while will turn off the wireless receiving function and the LED only displays a red dot, at this condition, can connect the A/V cable with A/V source for monitor using.
10 Earphone hole belong the side of the receiver is used for external earphone.
Basic specification for 7" TFT LCD
| Transmission frequency | ISM 2.400MHz -2.485MHz |
| Modulation Mode | FM |
| Antenna Type | Camera Omni; Receiver; Directional |
| transmission distance | Min. 100m transmission distance without blocks |
| Antenna Port | 50ohm SMA |
| Receiving Sensitivity | -85dBm |
| Vided output level | 1Vp-p@75ohm |
| Audio Output level | 1Vp-p@600ohm |
| Operating Temperature | -10 +50 / +14 +122F |
| Storage Temperature | -20 +60 / -4 +140F |
| Operating Humidity | 85%RH |
| Screen Size | 7.0 inch |
| Power Supply | DC12V 1.5A |
| Dimensions (W*D*H) | 190*140*20mm |
| Weight | 425g |
Technical specification for wireless camera
| Model | 802C |
| Image Sensor | 1/3'' OmniVision CMOS |
| TV System | PAL/NTSC |
| Validity Pixel | PAL: 628×582 NTSC: 510×492 |
| Horizontal Definition | 380Line |
| Scan Frequency | PAL/CCIR:50Hz NTSC/EIA: 60Hz |
| Angular Field of View | 45 (f=6mm) |
| Minimum Illumination | 0Lux |
| Input Power | 27dBm |
| Output Frequency | 2.4GHz (2.414GHz 2.432GHz 2.450GHz 2.468GHz) |
| Frequency Control | Adapt to MPU and phase locked loop to control frequency exactly, which possesses high stability. |
| Transmitting Signal | Ideo & Audio |
| Open transmission Distance | 100M |
| Infrared Distance | 10-15M |
| Power | DC12V/500mA |
| Current | 350mA |
| Power Consumption: | ≤4W |
| Working Temperature: | -10-+50 |
| Size | 68×52×105 mm |
| Weight: | 230g |
1 x Mini wireless cameras
1 x Camera power adapters
1 x 7.0'' LCD Monitor
1 x Monitor Adapter
1 x A/V line
1 x Remote
1 x Manual
1.Our payment methods are included Escrow,Bank transfer,Western Union and MoneyGram .
2.Your money is secure in Aliexpress account , Please confirm with aliexpress and release the money after the goods is delivered.
1.We will send the goods within 1-3 working days after your payment is verify by Aliexpress.
2.Our free shipping only included China post air mail and HK post air mail ,and the weight should be within 2KG. Please notice the China post air mail and HK post air mail are slowly.
3.If you want to send by EMS,DHL and UPS, you should pay for the shipping cost.
4.When we send the goods , we will responsible for the problem in China Customs ,and the buyer should responsible for the problem in buyers country Customs.
5.You will trace the goods online after sending the goods 1-2 working days.
6.Please check your goods on the shipping company face when you receive the goods.
7.If you find the phone is lost or damaged on the way. Please let the shipping company give you the prove. Then we will help you let the shipping company compensate you.
1. All merchandise we sell are in good quality and under strict examination before they are shipped.We will try our best to avoid any quality problem.
2. We promise warranty for quality in one year and we will repair it free of charge. The returning shipping should be paid by customer.
3. Your satisfaction of our products is guarantee. If you are not satisfied with the product, you may return the goods for exchange but please communicate with us before return. The shipping and handling charge is not refundable and customer should be responsible for all the charges of returning and reshipping.
4. All return items must be in good condition. They must be under resalable condition. Men made defects are not guarantee, such as broken, scratched and so on.
We sincerely hope could establish friendly and long-term partnership with you. Any questions, Please feel free to contact with us.
