AFC900X400 Adjustable Fine Crusher

Product Description

1.Product structure

This product is mainly composed of the rotary part,the part of the shield and the box part. In the rotary part ,Several cross non-overlapping arrangement of the hammer frame on the wheel core. The hammerhead fixed on the hammer frame. Hammer width is greater than the hammer frame and contour , Several contour welding into a Wheel core that.fixed on the main spindle. Both ends of Spindle support by the hydraulic bearing seat on the rack.Shield which protect the box from wear and tearcomposed a number of pieces fixed on the box , and formed various forms of impact crushing chamber.To facilitate of dismantling and overhaul,box is divided into upper and lower two parts with bolts to connected together.

2. operating principle

  (1)The machine consists of motor, pulley to drive main shaft rotating,the rapidly rotating hammer on the spindle and material collide material crushed.Since hammers is cross non-overlapping arrangement,and hammers’ width is greater than the hammer frame and contour ,that ensure the hammer participate in crushing by the full length of the rotor.And due to the hammerhead is inactive arranged,that is reducing the energy loss, when hammer blow the material, thereby enhancing the crushing efficiency.

(2)Structure designing Principle of this device is the stone to stone,and have coarse crushing cavity, the crushing cavity. wedge adjustable impact plate and the impact cavity of circular plate, And three discharging of channels.

At the feed opening is conducting screen, with the kinetic energy of the material from the conveyor filtering into the material that get into broken,the qualified material discharge from the first channel. Large particulate material into coarse crushing cavity that hammer strike area. After by the to high-speed rotating hammer blow, material fly out along the hammerhead turning circle tangent direction, crashing coarse crushing cavity counterattack screen. After crushing by cutting, return along a specific direction. focused on hammerhead above the turning circle somewhere. form dense colliding material laye. Successor of entering the crusher materials,as the "bullet targeting “launched into dense material layer .In coarse crushing cavity , just as a hail of bullets, bullets flying.Material ‘s each other high-speed collisions makes highly efficient.Stone-to-stone’s Cleavage crushing that means,material is torn along its own numerous broken defects. thereby formed numerous small particles and a great quantity fine powder

Qualified materials after through the impact sieve time and time again collide and impact  to make a large number of small particles and powder. In the crushing cavity the non-qualified small particulate material.Entre into adjustable impact plate and the cavity of a circular plate with hammerhead turning circle posed the impact cavity ,extrude and grind and be crushed and discharge by the third channel.

(3)As the machine in the coarse crushing cavity designs principle with “stone to stone”. that greatly reduce the hammer wearing.new entrants into the crusher qualified material or coarse crushing cavity of the material can be discharged in time, but also greatly improved production per set and reduce energy consumption.

,

patented product(s), Imitation is not permitted

Patent Number   200920090975.2

                 200900090976.7

                 200920090977.1

The main technical parameters 

Note: update of the continuous improvement of product performance, such as the parameters are subject to change without notice.

Specializing in the production of efficient fine crusher, new sand making machine, the third generation sand making machine, crushing machine, mining and metallurgy machinery, building materials, machinery and equipment, cement equipment. Pursue the "quality survival, reputation and development" business purpose and dedication to domestic and foreign businessmen to provide first-class products and service.Hotline:0371-67830555   67830777