Best price 6A 12/24V auto work, solar regulator,LED indicator ,CE, RoHS certification, low energy comsuption

1).Connection:
 according to indication in the picture:          
(1). Connect“+” and “-” poles of battery with the correct ports on the Controller (the third and fourth wires from the left).
(2). Connect “+” and “-”poles of solar panels with the correct ports on the controller (the first and second wires from the left).
(3). Connect “+” and “-” poles of load with the correct ports on the controller (the fifth and sixth wires from the left).
 

2)Indicator light:
(1). Three red LED. They indicate the voltage of battery. It indicates the voltage enough that three red LED are all illumining, and the voltage not enough that there is only one red light LED illumining. 
(2). One green LED. The battery is strongly charged when this light is illumining, the battery is floatingly charged when this LED is flickering, and the battery has stopped charging when the LED unlighted.
(3). The voltage of battery is little low when one red LED or two red LED are illumining, maybe the load can’t naturally work. But when the voltage of battery reaches 12.6v, the load will be allowed automatically to start work.
 

3).Attention:
(1). Please check the rated voltage of solar panels, battery, and load before connection.
Their rated voltage should be 12v.
(2). Pay more attention to “+” and “-” poles of solar panels, battery, controller and loads during the process of connection.
(3). The rated current of solar panels and loads are kept lower than the one of controller.