Bimetal Temperature Control Switch Thermostat 85C degree NC KSD9700 250V 5A 20 Pcs Per Lot

Alligator Test Clip Lead line cable Red & Black 100cm Long 12 set per Lot US$ 18.59 - US$ 18.89/lot 12 pieces / lot

Flat Small Test Clip for Multimeter 2 colors Red & Black Tiny Component Repair Tool High quality 120 pcs per Lot US$ 36.99 - US$ 42.99/lot 120 pieces / lot

Fuse Holder R3-11 for 5x20mm Fuse 100 Pcs10A 250V US$ 75.99 - US$ 659.00/lot 100 pieces / lot

Thermal Fuse 192C 216C 227C 228C 240C degree TF Cut-off 10A 250V 10 Pcs per lot US$ 6.99 - US$ 9.99/lot 10 pieces / lot

 

Metal Film Resistors 1W 1% 22 Ohm 200 pcs per Lot US$ 14.99 - US$ 19.99/lot 200 pieces / lot

Green LED Lamps 13000mcd 5mm 1000 pcs per Lot US$ 48.99 - US$ 58.99/lot 1000 pieces / lot

Blue LED Lamps 3000mcd 5mm 100 pcs per Lot US$ 5.49 - US$ 6.99/lot 100 pieces / lot

D-Sub 9 PIN Male Solder Connector for PC Use 50 pcs per Lot US$ 12.99 - US$ 15.99/lot 50 pieces / lot

 

 

20 Pcs Per Lot Bimetal Temperature Control Switch Thermostat 85C degree NC KSD9700 250V 5A

Description:

- 250V, 5A, Active temperature :85+/-5C, Reset temperature:65+/-10C

- Length : Appr.70-80mm

Structure and application:
KSD9700 series product is a kind of thermostat which adopt the bimetal disc as the temperature sensing element. The bimetal disc is in free state and the contacts are closed when the electrical appliance is working in normal condition. When the ambient temperature raises to the preset operating temperature, the contacts open as the bimetal disc deforms to jump when being heated, then the circuit is cut off to control the temperature .Then the contacts will close automatically to cut on the circuit when the electrical appliance is cooled down to the reset temperature. This product is widely used in home appliance’s motor and electrical equipment, such as air conditioner motor, transformer, thermal appliances, etc.

Precautions:
1. Please keep the cap firm with the installation surface of the controlled appliance when install. Please wipe conduction silicon grease to the sensing surface in order to insure effect of the temperature sensing.
2. Never collapse or deform the plastic or metal shell during installation in order to avoid any influence to its performance.
3. In order to avoid the creepage and insure security while using, do not throw away or crush the insulating sleeve when install the thermostat with metal shell.
4. For products used in circuit at no more than 5A current, please choose the lead with cross-section surface of copper core falls within0.4-0.75mm for connection.
5. Keep the product in clean dry warehouse at good ventilation and free of corrosive gas and with relative humidity less than 90% and ambient temperature under 40.

Other degree specification for your choice: 50C--100C is common in the retail market

Please indicate what temperature degree you want. You can choose anyone listed above.