Birthday wishing paper sky lantern

Product Description

Description

Himmelslaterne,party lantern/wishing lanterns/Chinese sky lantern/kongming sky lantern

Material: 17g copy pairs of flame-retardant paper or cotton paper, non iron wire production, 100% Degradable; OPP packaging.

Flight altitude: 800-1000 meters.
Burning Time: 10 ~ 12 minutes
Oval-shaped sky lanterns Size: 100* 60 * 40cm,
Cylindrical sky lanterns Size: 100 * 40 * 40cm,
Colors: Red, orange, yellow, green, green, blue, purple, pink, white

Sky Lantern released more modern use as a blessing. Young and old hand-written wish of blessing, a symbol of harvest success and happiness every year.

Sky Lantern Structure

Sky Lanterns The stent structure can be divided into two main parts, the main compiled mostly in the bamboo, sub-use tissue paper or with paper into a lampshade, the bottom bracket Zeyi

Bamboo whittled the composition of the grate. Updating and can vary circular can also be rectangular. A general updating and is used bamboo frame into a barrel-shaped, the outside with thin white

Thick surrounded the opening of paper down.

Flying
Choose sunny windless night, one light at the end of Hold the left and right side, another person will be cotton wool soaked with alcohol after the fire, until the hands are holes

Light there is an upward trend, that is, slowly release your hands, then slowly updating and launched into an increase of height of up to about 1000m.

Off procedural recommendations:
Sky Lantern launch is subject to space and the impact of weather large wind will be light body blow when Yi Er Shi oblique light body burned, body lights when it rains will be easy to get wet without France flying, it is best to take the time to release in the absence of wind.

1. First light body has softened, and in four weeks and the bottom line on the control line.
2. Filled with fuel.
3. Ignition, it will bring down the air intake in order to reduce heat loss, they must not be too low in order to avoid lack of oxygen flame. At the same time four weeks of the Control line must be straightened.
4. Heat until the temperature enough to heat the lamp body, after four weeks slowly release the line of control in order to maintain a steady increase in light body, while the bottom of the line of control
Must control the light-up the speed and height.
5. Ball off-line after you can control the height, direction, can be allowed to freely float, bringing the launch to complete.