CEM DT-9702 AC/DC Direct Cross Current Clamp Meter

Product Description

I.Introduction:
CEM launched Qiankou for 0.9 "DT-9702-AC-DC clamp table, not only has high performance high degree of accuracy, and case design make it more secure operation, in line with IEC61010-2-031 and the degree of pollution, such as safety standards 2

II.Feature:  

Characteristics:

4000 digital LCD screen, reading more clear

Automatic shutdown with low battery power and display capabilities, we can extend the battery life cycle, users can also timely to remind the replacement of low-power batteries.

Maintain the function of numerical data can be stored, for the operator to accurately read the measurement.

When the DC current measurement function cleared

DC current measurement
Range: 3, 20 A, 40A, 200A
Basic accuracy: + (2.5% + 3d)
Resolution: 10mA
Note: Before measuring DC current test to ensure that no form T connected with the instrument.
AC current measurement
Range: 3, 20 A, 40A, 200A
Basic accuracy: + (3.0% + 4d)
The maximum resolution: 10mA
Note: AC current measurement before the test to ensure that the table T does not connect with the instrument.
DC voltage measurement
Range: 5, 400 mV, 4V, 40V, 400V, 600V
Basic accuracy: + (0.8% + 2d)
Resolution: 0.1 mV
AC voltage measurement
Range: 4, 4V, 40V, 400V, 600V
Basic accuracy: + (1.5% + 3d)
Resolution: 0.1 mV
Resistance measurement
The largest measuring resistance of 40 M ?
Basic accuracy: + (1.2% + 4d)
Resolution: 0.01 M ?
Capacitance measurement
The largest measuring capacitance to 200.0 uF
Basic accuracy: + (3.5% + 5d)
Resolution: 0.1 ? F
Frequency Measurement
The largest measuring frequency of 9.999 MHz, duty cycle of 0.1% to 99.9%
Basic accuracy: + (0.8% + 3d)
Resolution: 0.01 Hz
Diodes and short-circuit test
Diode test, the test current: 0.3 mA typical, open circuit voltage: 1.5 V DC typical
Short-circuit test, <30 ? at the beep, the current test <0.3 mA
Numerical maintain functional
Press the button to maintain the numerical value locked. When the numerical maintain functional activities in the state will be displayed on the screen reading and "HOLD". Numerical again press the button to maintain cancel this feature.
Cleared function
Automatically cleared keys to DC current measurement, 400 mV DC voltage measurement, 4 V AC voltage measurement, capacitance measurement.

III.Specification:  

DC:

Current exchange:

DC voltage (automatic measurement)

AC voltage (automatic measurement)

Resistance (automatic measurement)