China post Free Shipping! GSM Security Alarm System with SMS Control ( 4 Inputs / 2 Outputs / USB Port ) RTU42US$ 109.30/piece
DHL Free Shipping, home security GSM sms remote control system (8 Input / 2 Output ) RTU82US$ 132.76/piece
DHL Free Shipping! 2pcs/lot, GSM Gate Door Opener Operator with sms remote control (1 Output / 2 Inputs ) RTU5015US$ 197.89/lot
2 pieces / lot
China Post Free Shiiping, Wireless GSM Home Security Alarm with 2 Output Relay, LCD Display, Industrial Remote Control A110US$ 134.63/piece
China Post Free Shipping! 2012 NEW Black Cover GSM Home Alarm system SMS sending and Remote control GSM-007M3 (900/1800MHZ)US$ 55.48/piece
China Post Free Shipping Wireless Personal GSM Senior Guardian for Ederly Protection, Medical Alarm with SOS Button B10US$ 98.00/piece
China post free shipping! Wireless home alarm system, support 99 wireless zones (900/1800mhz) 007M3US$ 54.97/piece
China post free shipping! Wireless Outdoor Strobe Siren with flash Big sizeUS$ 45.26/piece
home burglar alarm sysytem, home Security alarm system(GSM-M3A2) ,GSM-M3A2 Home Alarm system with wireless Keypad & SMS Control. auto-dialing 5 persons.3 wire zones, 99 wireless zones.
1, GSM 900/1800 MHz bands, can be used in most parts of the world
2, Full duplex (2-way) communication with the host (optional)
3, Voice-monitoring the scene environment
4, Voice and message alert
5, Set alarm ON or OFF (Arm/disarm) by remote controllers
6, Can set Home Arm and Out Arm mode and time-delay alarm
7, Call in to set alarm ON/OFF, Monitor, Output, and Intercom.
8, Send SMS to set alarm ON, OFF, Monitor, Output
9, 5 group phone + room number
10, 1 group alarm monitor center phone number
11, group phone to report arm and disarm status
12, Can program 7 groups of alarm messages
13, 3 zones for wired detectors
14, 99 zones for wireless detectors
15,2 outputs, can be used with external circuit to control home appliance
16, Easily set ON or OFF for every wired or wireless detector
17, SMS inform if external power failure or recovery
1. Insert SIM in alarm unit.
Put the SIM card carefully into the tray, and make sure the metal contacts of the SIM to be down.
Note: Before inserting SIM card into alarm unit, using a regular mobile phone to do the following steps:
- Set PIN code request to off.
- Delete all stored numbers.
2. Connect the antenna.
3. Insert the power supply.
a Connect the host with the adaptor. The host need 9V-12V DC, must be over 1000mA current.
b After 20 seconds, the signal status LED will turn to orange, and begin to flash, indicating system is checking SIM card and search for GSM network;
c After main unit finish checking the host, if the signal status LED turns to green and flashes slowly, it shows alarm phone number have been saved in the host, and the host is in arm status. If the signal status LED keeps on in green, it shows phone numbers have not been saved in the host, and the host is in disarm status.
4. Connect the siren to alarm system.
5. Connect wired sensors.
6. Connecting switched output devices (Home-appliance Control)
How to use remote controllers?
How to setup the alarm phone numbers and SMS
123456#51#13907550001# to save first group alarm phone number into the host.
123456#55#13907550005# to save fifth group alarm phone number into the host.
Password #71#monitoring center phone number #ID Number#
After this command was sent, the host will dial the monitoring center phone number when there is an alarm, and will show its ID Number in the monitoring center. For example, you can send: 123456#71#88886666#0001#. It shows the monitoring center number is: 88886666; user’s ID number is: 0001
Note: The monitoring center number should be no more than 15 digits; ID Number should be 4 digits. If there is no monitoring center, no need to set this command.
If the first wireless detector is triggered, the alarm message is: Wireless Activated (01)
If the sixth to sixteen wireless detector is triggered, the alarm message is: Wireless Activated (i); i=6-16
If the wired detector is triggered, the alarm message is: Wired Activated (i); i=1-3, for port 1 to 3 alarm
4. Users can send commands to the host to change the alarm content. The alarm message cannot be more than 24 letters.
123456#81#Front door open# to save first group message into the host when first wireless detector is triggered
123456#82#Middle door open# to save the 2nd SMS into the host when the 2nd wireless detector is triggered.
GSM Alarm system (control unit) – 1 pc.
Wireless PIR detector – 1 pc.
Wireless door (gap) sensor – 1 pc.
Remote controller – 2 pcs.
GSM Antenna – 1pc.
Mini wired siren 110dB/0.3m – 1 pc.
Power supply (adapter) – 1pc.
Installation/user manual – 1pc.
Wireless Smoke Detector, Ion technology for fire-proof, alarm accessory for any Home Alarm SystemUS$ 8.42 - US$ 10.53/piece
Wireless PIR Motion Sensor Passive Infrared Detector for any Home Alarm SystemUS$ 7.37 - US$ 9.47/piece
Wireless Outdoor Strobe Siren with flash for any wireless alarm systemUS$ 33.68 - US$ 37.89/piece