Smarter Shopping, Better Living!
Controls from your radio & multi-function steering wheel!
Digital CD Changer USB/SD/AUX MP3 Interface is a revolutional replacement product for CD Changer. It is full-featured solution to connect, play and control MP3/WMA on car factory radio, without FM Transmitter control.
Combining USB slot, SD/SDHC/MMC slot, and AUX IN slot, it provides car owners access to vast audio sources.
Acted as a converter of "Entertainment Source", Digital CD Changer can make travel more entertaining and increase peace of mind.

GOOD NEWS! A gift of 4GB USB flash drive will be included in the package.
>> Features
* Connected with wire harness, not FM signal controlled, high quality sound guaranteed
* Controlled by car radio buttons, Steering Wheel operation remains functional.
* Built-in MP3/WMA Decoding Chip, perfectly support MP3 and WMA music tracks
* Built in SD/SDHC/MMC Card slot, USB Stick slot, and AUX slot
* Supports external audio source (MP3, MP4, PSP, mobile phone, ipod) via AUX IN slot
* Playlist function same as multi CDs
* Support last position memory(LPM)
* Shock proof and electromagnetic interference proof
* Easy to install, no damage to the original car circuit
* Not battery required
>> Application
This USB SD MP3 Interface fits for the following Honda models and years (without Navigation)
2003-2011 Accord
2002-2011 City
2006-2011 Civic
2004-2011 CR-V
2003-2011 Element
2006-2011 Fit / Jazz
2004-2009 FR-V
2005-2010 Odyssey
2006-2011 Pilot
2006-2010 Ridgeline
2005-2010 S2000


Remarks:
1. If the CD Changer port is used by CD changer, please contact us for further solution of combining this interface with the CD Changer.
2. If your head unit is equipped with Navigation, an extra splitter/Y cable would be needed, please click the following item to buy:
>> Installation Steps

1. Before installation, unplug the stereo from power source. Remove the stereo from the dashboard, and find CD changer port at the back of the stereo.
2. Properly connect the wire harness between this Interface and the stereo. Also connect the black GROUND(GND) cable (if there is) to the metal body of the stereo.
3. Connect the stereo to the power source, insert MP3/WMA media device into this Interface and turn on the stereo, check whether the system works properly.
4. After successful testing, reassemble the stereo into the dashboard, put this Interface module unit and wire harness in proper place. Then installation is completed.
*** If you want to install it on your own, we have installation guide video to share with you.
>> Standard Package Content /SET:
* one piece module unit
* one piece vehicle specific wire harness
* one piece 3.5mm AUX-IN cable
* one piece user manual
* one piece 4GB USB flash drive


Enjoy your bid here! : )