Digital CD Changer USB SD AUX MP3 Interface for VOLVO HU-403 HU-601 HU-603 HU-803 radios

Product Description

Controls from your radio & multi-function steering wheel!

Car Digital CD Changer USB/SD/AUX MP3 Interface is a revolutional replacement product for CD Changer.

It is full-featured solution to connect, play and control MP3/WMA on car factory radio, without FM Transmitter control. 
Combining USB slot, SD/SDHC/MMC slot, and AUX IN slot, it provides car owners access to vast audio sources. 
Acted as a converter of "Entertainment Source", Digital CD Changer can make travel more entertaining and increase peace of mind.

>> Features

* Connected with wire harness, not FM signal controlled, high quality sound guaranteed
* Controlled by car radio buttons, Steering Wheel operation remains functional.
* Built-in MP3/WMA Decoding Chip, perfectly support MP3 and WMA music tracks
* Built in SD/SDHC/MMC Card slot, USB Stick slot, and AUX slot
* Supports external audio source (MP3, MP4, PSP, mobile phone, ipod) via AUX IN slot
* Playlist function same as multi CDs
* Support last position memory(LPM)
* Shock proof and electromagnetic interference proof
* Easy to install, no damage to the original car circuit

* Not battery required

>> Application

Generally fit for the following VOLVO models with radios HU-403, HU-601, HU-603, HU-803:

Volvo S40
Volvo V40
Volvo S60
Volvo S70
Volvo V70
Volvo S80
Volvo C70
Volvo XC70

IMPORTANT!

1 It is only fit for vehicles whose factory fitted Head Unit is with free CD Changer Port.

2 This auction is Not for car radios with RTI Navigation system.

3 If your car & radio models are not listed above, please enquire us for details, in order to avoid un-compatibility. Thank you.

Remarks: The CD Changer Port should NOT be occupied.

>> Installation Steps

 
1. Before installation, switch off the electric power, take out the Head Unit, and find CD Changer port at the back of the Head Unit.
2. Properly connect the wire harness between YATOUR and the Head Unit.
3. Switch on the electric power, insert MP3/WMA storage device and run the Head Unit, check whether YATOUR works normally.
4. After the successful test, fix the Head Unit in the original place, and put the wire harness in proper place. Then installation is completed.

>> Standard Package Content /SET:
* Module Unit      One piece
* Wire Harness   One piece
* 3.5mm male/male AUX Cable   One piece
* User Manual     One piece