Smarter Shopping, Better Living!
Welcom to my store!
Please leave a message to specify the color when you make an order. Or color will send randomly.
Enjoy your shopping!
Free Shipping New Style Mini Handheld Fan USB Air Conditioning Fan USB Pocket Fan Summer Hot Selling
1)Material: ABS Plastic
2)Individual product packaging: 14*6 *20.5cm
3)Color: Pink, Blue, Black
1)There are two ways of working air conditioning---Refrigeration&general fan mode
a)the random distribution with a full wet sponge after (as the standard of not dripping)sponge back into the machine-specific area. Open air, cold air cooling can be achieved
b)If you do not want refrigeration,put the sponge out and continue to open the air-conditioning,then there will be no cold wind will blow
Sponge can be reused!
2)Power Supply(There are three ways to power)
a)USB interface(There is a USB cable inside the package)
b)Powered by 4pcs of AA batteries
c)AC Power supply(the AC adapter is prepared by customers)
A)Product is not waterproof products, sponge should be removed with water after the addition of water. Direct injection can not prevent water from entering the internal damage to the machine
B)To fill the sponge is not dripping humidity prevail. If too much can be wrung out and then flooding into the internal machine
C)Please note:Product is not resistant to high-altitude drops
D)It is recommend to dry the sponge after using the sponge,so as to avoid the breeding of bacteria and odors.
Kind Tips: If you need it with the smell of the cold wind blowing out,you can put a few drops of essential oil to the sponge on OK.Of course,we must remember that after use the water soak into the dry cleaning again!
1)Slide the battery compartment cover and remove the
2) the placement of four AA alkaline batteries new
3) Replace the battery compartment cover
4) Long-term remove the batteries when not in use. To an external power supply, external power supply unit with DC outlet in the hands of the interface
5) We configured the device to replace the power plug into the outlet port DC
6) connected to the household power supply to the battery status can be used in the absence of carry-cold
Installation of water sponge:
1)Turn off the machine
2)by pushing the top lever pull to sponge off the lid with a sponge with water
3)for the first time: the water-cooled sponge soaked in tap water and rub thoroughly with soap. Please be careful with sponges, do not wash too much pressure when.
4)If the sea water left there last used, please remove the sponge from the lid, the remaining water squeezed out.
5)sponge in the water-cooled flat on the sponge to cover the same time as described
6)Insert the point of first jack, the sponge with sponge re-install the cover, then the direction of the lid to lock into the host.
Do not over-water sponge soaked. Do not brew the flow of water following a sponge. Master the use of 30ML of water immersion is difficult, you have been using bottles filled with water. The machine is not waterproof, avoid contact with other water outside. If water leakage occurs in the operation, then it may be your sponge into the water in excess (see Step Five); or perhaps you did not before soaking sponge the remaining water out of the previous.
Host battery compartment lid at the top there are two switches:
1)The snow can control the machine power switch and the air cooler air velocity
2)The lighting switch can control the machine at the top of LED light and dark (the temporary lighting for night travel device)
3)Open the machine, click the snow switch, low speed operation. Click, the motor told to run (speed can be adjusted according to the environment in which)
4)rotating air pipe air output direction can be adjusted, easy to give you a better cooling effect
5)When the cold air to reduce re-soaked sponge when you see water sponge installation. Open the lid touch the sponge sponge sponge is dry confirmed. Use of the time due to the use of different and vary the environment (about half an hour to 3 hours)
6)on a regular basis to ensure that it continues to touch the sponge is wet, if the sponge dry, re-soaked sponge
To effectively produce cool air, sponge must be wet, if not, follow the water-cooled sponge installation instructions. Maintenance of water sponge After each operation, follow the instructions to remove the sponge Figure lid, excess water out of the sponge, the sponge in the air to dry. For best results, regular cleaning of your water sponge, soaking before use anti-bacterial. Make sure your hands are clean when dealing with a clean sponge In order to have a slight aroma of the sea water you can use your own aromatic oil. After a sponge soaking wet sponge detailed installation instructions) water in the sponge surface, a few drops of essential oil needed, wash thoroughly after use. Do not sponge with a mixture of different smells.
(A). EMS express shipping usually takes 5-8 working days dependent on the country delivered to.
(B). UPS, DHL, FEDEX and TNT express shipping usually take 3-5 working days dependent on the country delivered to.