Free Shipping!Hot Sale DR-520 toner cartridge compatible for Brother DCP 8060/DCP 8065DN/HL-5240/HL-5250DN/HL-5250DNT/HL-5280DW

Product Description

Packeging & Delivry

 Packeging Detail: OEM packing ,Original packing ,custom made packing

 Delivery Detail: delivery in 3days after payment,OEM order need 7days

New DR-520 toner cartridge compatible for Brother DCP 8060/DCP 8065DN/HL-5240/HL-5250DN/HL-5250DNT/HL-5280DW/MFC-8460N/MFC-8860DN/MFC-8870DW/HL-5270N

  Detailed Descriptions

1)high quality as original

2) 3 times test before sell

3) Delivery:3-7 days upon receipt of payment confirmation

4) Fast delivery

5)Excellent service

6)Page Yield (5% Coverage)25000 Pages

7)Excellent and high quality control

8)18 months warranty and long-term technical support

9)Competitive price.

10)Defective rate 0.03%

11)Any inquiry will be required within 24 hours

12)ISO9001 & ISO14001 certificates.

Cartridge for use

Operating methods and precautions

1. Please check the printer cartridge prior to use within the powder or dust is tainted scraps of paper, if Clean the printer.

2. Cartridge before use if you are in a cold place set it at room temperature for more than an hour.

3. When opening the package, product appearance may be a small amount of black powder, Wipe clean with a dry cloth to ease of use, will not affect the quality of results. Because some products are not sealed, a small amount of toner smell during transport; the other seal products, but also the detection of residual powder in the magnetic stick, but will not affect the print result.

4. Do not open the cartridge after removing the cover and touch the drum against hard things or touch the drum;

Prevent drum damage.

5. The machine is not the case of power failure; do not remove the print cartridge.

6. Pull out the seal of the cartridge in the level before rolling shake, shake the toner;

Be sure to pull out on the front seal; Uniform horizontal force pulling out a one-time seal.

7. To avoid the cartridge at a high temperature, high humidity, cold environment, use and storage.

Ensure that the cartridge away from the monitor, hard drive or other magnetic material.

8. Paper when printing, the printed page perpendicular to the light areas appears on the machine rather than the failure problem;

Please power off the machine after removing the drum, the drum roll before and after the shaking into the machine to continue to use until the toner used up.

Instructions for use: Shake the cartridge to distribute the toner, seal out the parallel and balanced force, the right to selenium Drum to the printer.

Toner powder leakage: In addition to damage outside the shell, usually during transport or because some customers in the process, the toner powder inside the magnetic stick plot reasons. Solution is very simple, as long as the drum core along the direction of Turn a few laps on it.

◊Print files and OPC simultaneously on the same 1 cm wide vertical black Road, generally considered to be leaking powder customers: This is a problem with the scraper, causing the core on the powder stick scraping quit Road, generally considered to be leaking powder customers: This is a problem with the scraper, causing the core on the powder stick scraping quit Net.

◊Appear on the print file was fine vertical underworld: it is usually the edge of a small scraper and scraper scraping dirt or glue the pieces of paper.

◊horizontal print paper appears in the underworld: the magnetic cartridge is usually a powder stick plot, along the turn laps on it.

◊If the print file on the apparent bottom ash: OPC or toner is usually a problem.

◊uneven color print paper, was the famous White Road: from the outside can not see the stick magnetic toner, magnetic stick to see if there are some places on the powder, no powder in some places, indicates that the print cartridge to run out.

◊If the printer is playing a white one: check printer has no problem, if there is no problem, it shows when the cartridge is a problem in the assembly.

◊In addition to the above questions, usually that the printer can be a problem.

 friendly reminder :

Use common sense cartridge:

1. Install and remove the cartridge, the printer should be first off.

2. The new cartridge into the printer, you should jiggle a few, and even loose toner in order to ensure printing.

3. Avoid direct contact with photosensitive drum core of light, and do not touch the photosensitive drum core.

4. The toner will run out, no clear and uniform print when writing, remove the cartridge jiggle a few, can continue to print dozens of pages.

5. In order to avoid affecting the normal office, the user should always maintain a new cartridge backup.

6. Selenium should be properly used empty packing placed to avoid polluting the environment.

       Welcome! Have a nice day!Looking forward to your next visit