GPS location accuracy 15 M
GSM Network accuracy 200 M
GPS Band 1575 MHz
GSM Band 850/900/1800/1900 MHz
Display Size 1.44 TFT
Standby consumption 1 to 3 mA
GPS connecting 70 mA
Standby time 7 days
Continuous monitoring 8 - 10 hours
Battery 600 - 750 mAh Hi Li-ion rechargeable battery (750 mAh For Watches tyle)
Hot start time about 3 seconds
Warm start time about 15 seconds
Cold start time < 60 s (Autonomous)
Working temperature -20 to 65
Working humidity 5% to 95%
Storage temperature -45 to +90
Restrictive working temp ≤-40 or ≥+80
Press and hold the key till it shows the turn on Logo, then it will enter the main interface and show the current time ,date automatically.
When stand by, press and hold the key to turn off. The operation will be finished after displaying image shutdown.
When the tracker standby ( with SIM card): press and hold the key for 3 seconds, the tracker will shock for once indicating to enter “one press help” mode, then it will send message to the preset numbers followed by dialing guardian,SOS1, SOS2, SOS3 numbers, after then it will go to the listening status automatically.
When the tracker standby, it can call out the pre-set numbers by press and hold the key , or respectively. The key is the main controller /guardian number.
Phone numbers Pre-set
Please set guardian numbers by referring to the setup instructions in appendix “ V ”.
GPS tracker rings and vibrates when a call comes in, the LCD screen will show the caller's phone number and time.
Press the key once to receive the call.
Press the key or to reject the call.
The missed call will be displayed on the LCD interface ..
Any missed call or call failed to answer will be displayed.
To check the missed call, press to read it
The tracker device with auto hands-free function. When the headset be connected, it will change the output mode to the headset automatically, and reminding will be displayed if the connection is corrected.
While talking, press the key to increase the call volume, or press the key to decrease the call volume .
GPS tracker will turn to GPS function when it boot. It will correct and update the time and date.
When power on, press to select the GPS functions (positioning status, latitude, longitude, altitude, speed, direction). Then the tracker will turn on the GPS function automatically.
Press the key to enter the function menu interface, there are some functions :
Message: To check message received.
Press the key once to enter the function menu interface, press to select the message.If there’s no message, the screen will be blank; if with message, it will enter the message list interface. It can be stored with 19 messages. If a new message comes in, the first message will be deleted automatically.
Weather: To view the current location weather information. Press the key and the message will be displayed. Shortcuts: Main interface buttons .
My position: To view the current geographic location information. Press the key and the message will be displayed. Shortcuts: Main interface buttons .
Language: Set the display language(Chinese,English,Frence,Rassian,German).
Time setting: Set the time zone, daylight saving time.
Alarm: Set alarm.
GPS Status: Check current location’s GPS satellite signal searching strength.
Press the key to enter the function menu interface, press to select GPS status, enter the GPS satellite searching mode interface, if GPS is in normal, and also in the GPS signal covered area, LCD screen will display the status diagram of the satellite and satellite signal strength.