the PCF8591 the AD / DA chip The PCF8591 is a monolithic integration of a separate power supply, low-power 8-bit CMOS data acquisition device. The PCF8591 has 4 analog inputs, one analog output and a serial I2C bus interface. PCF8591 three address pins A0, A1 and A2 can be used in hardware address programmed to allow access to eight PCF8591 devices on the same I2C bus without additional hardware. Input and output address, control and data signals are transmitted through the two-line bidirectional I2C-bus serial PCF8591 device.
PCF8591 key performance indicators:
Single-Supply Operation
PCF8591 operating voltage range of 2.5V to 6V
Low standby current
through the I2C bus serial input / output
PCF8591 by 3 hardware address pins addressing
Sampling rate PCF8591 I2C bus rate decided
4 analog inputs programmable as single-ended or differential inputs
Automatic incremental channel selection
PCF8591 analog voltage range from VSS to VDD
PCF8591 built-in track and hold circuit
8-bit successive approximation A / D converter
through an analog output DAC gain
Second, the baby description
A module chip using PCF8951
2 module supports external voltage input acquisition (voltage input range 0-5v)
Three modules integrated photoresistor acquisition environment through the AD intensity accurate numerical
modules integrated thermistor, can capture the precise value of the ambient temperature through the AD The five-module integrated 1 channel 0-5V voltage input acquisition (blue potentiometer to adjust the input voltage)
6 modules with power indicator light (on the module after power indicator lights)
7 modules with the DA output indicator light board DA output indicator module DA output interface voltage reaches a certain value, the voltage the greater the light brightness is more obvious;
8 module PCB size: 3.6cm * 2.3cm
9 standard double-sided, plate thickness 1.6mm, the layout is nice, surrounded by the through-hole, aperture: 3mm, convenient fixed
Third, the module interface
The module's left and right, respectively, the external expansion of 2-way pin interface, respectively, as follows:
Output interface of the left the AOUT chip DA
The AINO chip analog input interface.
AIN1 chip analog input interface
AIN2 chip analog input interface
AIN3 chip analog input interface
The right side of the SCL IIC clock interface to access the microcontroller IO port
The SDA IIC digital interface connected microcontroller IO port
GND module to an external
VCC power supply interface external 3.3v-5v
Module red jumper instructions for use
Module three red short circuit cap, respectively, the role are as follows:
P4 connected to the P4 jumper, select thermistor access circuit
P5 connected to P5 jumper to select the photoresistor access circuit
P6 connected to the P6 jumper, to select 0-5V adjustable voltage access circuit
Package Included
2 x Light Sensor
2x 20cm DuPont line 5, for easy connection


50 High Power 1 3w LED Heat Sink Aluminum Base plateUS$ 10.99 - US$ 13.99/lot50 pieces / lot |
|
50pcs mini 650nm 5mW 5V Laser Dot Diode Module HeadUS$ 20.99 - US$ 29.99/lot50 pieces / lot |
|
500x 2.54mm Standard Circuit Board Jumper Cap shuntsUS$ 5.99 - US$ 8.99/lot500 pieces / lot |
|
50pcs mini 650nm 5mW 3V Laser Dot Diode Module HeadUS$ 20.99 - US$ 29.99/lot50 pieces / lot |
Freeshipping 100 PCS Double Row Male 2X40 Pin Header Strip 2.54 mm WholesaleUS$ 9.99 - US$ 14.99/lot100 pieces / lot |
|
Aquarium Floating Magnetic Glass Tanker Algae Brush WholesaleUS$ 5.80 - US$ 10.99/piece |
|
2012 spring new design Korean style shoulder bag big bag BlackUS$ 15.99 - US$ 27.99/piece |
|
Freeshipping Korean fashion women Tassel handbags PU leather purpleUS$ 17.99 - US$ 27.99/piece |