1> Materials:Hard-anodized anti-abrasive Aluminium
2> Input Voltage:9 to 16V
3> Working Voltage:12.6V
4> Working Current:1.4A
5> Illuminious intensity:750LM
6> Color Temperature:6000K(4200K to 10000K)
7> Output power:10W
8> IP grade:IPX3
9> Battery: ICR18650*3S2P(6600mAh)
10> Lighting distance:500 meters
11> Power Efficiency:75LM/W
12> Lighting time:4 hours
Safety Protection Instructions; A: open circuit protection; start with the lights, open circuit when the output occurs when abnormal conditions, stop working in one second to enter the protected status.
B: short circuit protection; start the lamp, when the output short-circuit is abnormal, stop working in one second to enter the protected status.
C: Battery overcharge and over discharge protection; charging voltage to achieve
the specified automatic protection, care, discharge voltage when a specified automatic protection.
D: short-circuit protection; when the positive and negative short-circuit the battery, the battery protection board will immediately power off, and access to protected status.
Usage; A: light before using this product, the first head part fixed to the head,
the lamp power cable connector corresponds to the battery power connector plugged
in tight. B: Press the Stubbs the opening lights to achieve light on features.
C: regulation Dengying: beam can be adjusted by rotating the head best.
D: charge; unplug charging sleeve, plug in the charger (charger green light indicates when the battery is full), charging time is about 4.5-6 hours.
Note: A: Do not direct the eye with a flashlight and watch the torch to avoid
direct light, so as not to damage the eyes;
B: use before the battery is fully charged in advance, away from flammable,
explosive objects or gas. C: a flashlight placed in bags or similar packaging
bag, careful to avoid other objects touching the switch, to avoid being exposed
to switch to light up flashlight, causing unnecessary harm.
D: light bulb after about 30 seconds to achieve the best light, it is HID features, so if
the dimming dimming after 30 seconds will clear.
E: use the car charger when the battery to start the engine to fully charged;
F: a place in the environment charge high temperature or continuous discharge time is
long, the torch is slightly warming the surface is a normal phenomenon, flashlights, work
long hours Do not touch the glass lens to prevent burns.