Handheld Wired Wireless MIC Microphone and Receiver
1. Screw off the housing, insert a battery (size AA) with the correct polarity and screw on the housing before inserting the telescopic antenna and set the switch to the ON position. The pilot lamp is on at this time. Insert another battery (size AAA) into the receiver with the correct polarity. Set the switch of receiver to ON position, then the pilot lamp is on that indicate a good condition. After that, plug the receiver into the input socket for microphone of amplifier and it is ready for operation.
2. When you need temporary stop during singing and you don’t want the microphone to pick up any other sound, you may set the switch to the middle (MIC) position. Now, the lamp is still on Use it as wired microphone.
3. Take out the battery from the microphone, connect the wire to the microphone and set the switch to MIC position.
1. If acoustic quality and volume are abnormal or receiving distance is shorted, the batteries in wireless microphone and receiver should be replaced, If thereafter still not in normal operation, you can carefully trim the frequency of receiver with a screwdriver to become normal operation, you can carefully trim the frequency of receiver with a screwdriver to become normal operation.
2. If your microphone isn’t used for a long period, the battery should be taken out to avoid its deterioration and the damage of components.
3. If two wireless microphones are used at the same time, you must use them with one red and another green lamp and can’t use them with the lamp of the same color.
Microphone sensitivity :-72db
Frequency response :100 to 10000H Output impedance:600ohm
Effective distance :15 to 30m
*RF carrier frequency band :210-266MHZ
*Sensitivity : 47(dB)
battery not included
1. Please contact us before leaving any negative or neutral feedback. We will do our best to solve each problem.2. A positve feedback will be very apprieciated.3. Please do not hesitate to send us emails if you want to place a larger order than listed, we will try our best to help you, thanks.
Shipping And Handling:
1. After payment confirmed, item will be shipped within 48 hours. 2. The shipping and handling fee covers packing, warehouse, distribution cost, etc which is not just for postage only.3. We will provide the appropriate item value to avoid your country's customs fees.4. Buyers are responsible for additional COD charges, VAT, Customs fees, and Duty for importation (if any).
Promised By Seller Returns:
1. We do our best to serve our each customer the best that we can.2. We will refund you for items returned within 7 days of you receiving them, for any reason. A full refund will be given if items are returned in their original condition.3. Merchandise which is damaged or missing components is not refundable.4. Buyers are responsible for return shipping with proper packaging.5. On receiving items, we will refund you immediately. Warranty &Maintenance:
1. We provide 1 month replacement and 12 months maintenance warranties. Items can be replaced during the first month or maintained for the first year. 2. Buyers are only responsible for the return shipping fees for warranty items.(In most cases, buyer will only have to return the problem components rather than the entire package.). 3. Before returning items, please make sure you get our (the seller's) return address, and write “gift” on the delivery detail sheet. Please use regular postal service and send