High quality Active Speaker

Product Description

Active line array, active speaker, line array speaker,High quality and good price!

Loudspeaker, Line array speaker system, Power amplifier, Pa system, Karaoke system,
    Console mixer and signal processor are covered among TASSO product line professional audio.
      Most are CE and RoHS certified.

TASSO never stops it pace to be excelsior.  After the successful launch of KF208 and KF210 in its Mini Line Array Series which has been a hot sales in world market, we are now unveiling a new Mini Line Array KF310.
     New KF310 equipped with two custom-made 10" loudspeakers symmetrically and oppositely placed in the plywood enclosure with an angle of 120° like a butterfly. This structure helps to concentrate the airflow and convey a directional sound.  A 2" driver (titanium diaphragm) followed by a unique wave adapter with horn, it enables KF310 delivers an even sound pressure to audience from near field to far field without compromising clean transparence.  
     Integrated hanging system including easy studs for connecting speakers, hanging cradle, hoist, etc makes the system convenient for mobile performance. Flying hardware provides for splay angles from 0°to 6.0°with an increment of 1.5°, providing a seamless array.   

KF310

Type..........................................2-way full range
Component.............................10"×2+2"+Horn
Nominal Impedance...............4Ω
RMS Power handling............500W
Peak Power handling.............1000W
Frequency Response............55Hz-20KHz
Sensitivity(1W/1M)........104dB
Max.  SPL................................132dB
Recommended Amp..............SD800  or  I4  for  2pcs
                                                  TP1.1K  for  4pcs
Dispersion...............................72°H×10°V
Conector..................................2×NL4
                                                   MF(±1), HF(±2) 
Horn throat size......................1"(25mm)
Voice coil size.........................2"(44mm)
Crossover................................1.8KHz
Dimensions HWD(mm).........320×820×550
Shipping HWD(mm)..............375×940×620 (0.22CBM)
NW/GW(Kg)..........................35/39

 1. Put the U-rings to the hanging frame

 2. Connecting KF310B to the hanging frame by using the built-in slide bar and flying pin(easy stud)

3. Repeat the Step 2 above to connect other speakers.

4. Rise up the connected speakers and check if the frames and hanged speakers are in a horizontal line.

5. Fix well the provided connecting bar (used in horizontal) which is used for connecting the downside KF310

6. Use the tilted connecting bar at speaker backside to fix the up and down speakers.

7. The above connecting needs to be done at the same time with another 2 built-in slide bars at speaker front

8. Then connect the KF310 to KF310B(upside)

9. Repeat the connecting of KF310 and make your entire line array system finally.

Please install the rest of KF310 and tune the throat angle, repeat the aboved step, it will be accomplished.