Product Description

PID Temperature Controller REX-C100

Factory setting: 

Output:(Voltage) SSR

Input:PT100

 Leave message about Voltage(SSR) OR RELAY you need.

The input setting can be adjusted by yourself.

 Attention:

Some items signed with "Voltage" output,and some with "SSR" output,

They are both standing for"solid-state relay", pls don't worry. 

Dual Digital F/C PID Temperature Controller

SPECIFICATIONS:

• Measuring accuracy: +0.5%FS or -o.5%FS

• Cold-end compensation tolerance: +2 or -2(can be modified by software in 0~50)

• Resolution: 14 bit

• Sampling cycle: 0.5 Sec

• Dimensions:48 x 48 x 110 (mm) ±0.2mm

• Process value (PV), Setting value (SV)

• Output, alarm and self-tuning can be indicated by: LED

• PIN control (including ON/OFF, step-type PID and continuous PID)

• Self-tuning control

• Relay output: contact capacity 250V AC 3A (resistive load)

• Voltage pulse output: 0/12V

• Alarm function output: 1 way

• Contact capacity of output: 250V AC 3A (resistive load)

• Setting value (SV): identical to measuring range (PV)

• Proportional band (P): 0~full range (ON/OFF control when set to 0)

• Integral time (I): 0~3600 sec (No integral action when set to 0)

• Derivative time (D): 0~3600 sec (No derivative action when set to 0)

• Heat-reset proportional cycle: 1~100 sec

• Detective temperature range:0 to 400

• Insulation resistance: >50M ohm(500V DC)

• Insulation resistance: 1500V AC/min

• Power Consumption: 10 VA

• Service environment: 0~50, environment with no corrosive gas 30~85% RH