RJ45 CAT5 Network LAN Cable Tester Meter Length SC8108 wholesale and retail#E09163

Product Description

RJ45 CAT5 Network LAN Cable Tester Meter Length SC8108 wholesale and retail#E09163                                         
      

Key feature

1,cable connectivity can be tested by oneself

2,Easy to carry 
3,type:SC8108 
                            

Introduction:

One person enough to complete cable continuity check.
Check wiring error in 5E,6E, coaxial cable and telephone line
Such as open circuit, short circuit, jumper wire, reverse connection or cross-talk interference.
Locate the wiring or connection error.
Measure cable length and determine the distance of open circuit and short circuit.
Dynamically calibrate cable length and make length measurement as accurate as accurate as 97%
Simple and easy use. Big screen to display test result clear.
Portable unit with long battery life(wait-case 50 hours).
Automatically time-delay shut off.
Measure length and there are 8 far-end passive test jacks(ID No.ID1-ID 8).
Far-end recognizer with prompting voice.
Self-check function and automatically compensate any change in battery capacity or ambient temperature.
Single board computer software watchdog design and reliable operation.

Technical Specification

1.Overall Dimension
180*80*40mm
2.Power Supply
4*1.5V Size AA batteries with power consumption 16mA
3.Display
Special 4*16 character big screen LCD lattice (valid visual field 61.6*25.2mm)
4.Type of Test Cable
STP/UTP twin twisted cable, coaxial cable, telephone line
5.Working Ambient Temperature
-10----+60
6.Tester Port
Tester R/45 master port(M), tester LOOPBACK port(L), far-end recognizer RJ45 port(R). The extra BNC and RJ11 converters are used to
measure and check the continuity of coaxial cable and telephone line.
7. length Measurement of Twin Twisted Cable
Scope:1350M(31,200 ft)
Calibration accuracy :3%(+/- 0.5M or +/- 1.5 ft)(calibrating cable>5M)
Shipment accuracy:5%(+/- 0.5M or +/- 1.5 ft).(AMP, AT&T Class 5 Cable)
Display: M or ft.
8.Length Calibration
User can set calibration factor by himself with a given length cable. The length of calibrating cable is more than 5M
9.Wire Sequence and Locating Cable Error:
Check error such as open circuit, short circuit, reverse connection, cross-over or cross-talk interference.
10.Locating Cable
8 far-end passive test jacks(ID 1≥ ID 8).
11.Automatic Time-delay Shut off Time:
The tester does not operate for 30 minutes.

Package Included

Multi-Network Cable Tester
Far-End Test Jack
Instruction Manual

Pictures: