Remote power switch lights ARD1 care 2 water heater, Yuba special

Product Description

Description
Model: ARD-A3-2 (1 drag 2)
Accessories: 1 remote control, 2 way receiver, a remote control holder, a battery, a manual
Technical parameters:
1, operating voltage: AC 220V, 50/60Hz Standby power consumption: 0.06W (dual system, input must be connected to the zero line and the line of fire)
2, the total power load per channel:
A, pure resistive load: 3000W or less (such as: Wu Si light, incandescent, etc.)
B, inductive loads or capacitive loads; 800W or less (such as "sodium, metal halide, fighting once light, vegetarian halogen lamps, energy saving lamps, fluorescent lamps, lamp, lighting, appliances, etc.)
3, remote control distance: Outdoor greater than 50 meters (open area without any obstacles) depending on the actual situation.
  Indoor greater than 20 meters (can be wall remote control, too many walls and obstacles the case of the remote distance has been shortened)
(The remote control can pass through the wall through the wall remote control, remote installation distance and has a direct impact on the environment, metal objects on the signal shielding phenomenon, depending on the specific installation remote from the actual situation of the environment and are subject to change)
4, suitable temperature: minus 30 degrees Celsius to 60 degrees Celsius above zero, the body temperature: 30 to 50 degrees Celsius
5, load current: 30A relay control the use of nominal
6, the use of single-chip wireless digital code, each has its own set of remote control switches the encoding, the same room will not interfere with each other using multiple sets of
7, the receiver material: metal, black receiver size: 96 * 42 * 27mm
8, the remote control Material: ABS fire-retardant material, black, silver remote control Size: 95 * 38 * 11mm
9, remote control battery Model: A23 12V battery, generally available 6-12 months
Note: This A23 12V battery is generally a large supermarket or large shopping malls can buy, the car alarm is used in the battery, which has a car you, so do not worry about not buy this model A23 12V battery
10, remote control switch circuit board using FR-4 fiberglass substrate material. Glass fiber board, made of glass fiber materials and high heat resistance of synthetic resin material, does not contain harmful asbestos. With high mechanical properties and dielectric properties, high temperature resistance, moisture resistance, hardness and resistance to bending is very good. Resin is flame-retardant material.
Product Features:
Power in the case of default:
Using the remote control:
Remote control for the A, B, C, three key
1 Press A A receiver is lit, then press the A button A receiver is off
2, press B to B the receiver off, press the B button B the receiver off
3, press the C key AB receivers are illuminated, then press the C key to all receivers off AB 

Shipping & Handing

 Our packing is very careful to ensure safe delivery. Tracking number will be emailed to you, we will leave your package.If you need two or more items, please contact the seller, We will give preferential treatment! So, you can save more money! Bidding more saving more!

Warranty & Return

 If item arrived defective or damaged, full refund will be unconditionally forwarded to you.Buyer have 7 days refund guarantee after the merchandise receipt. The returned item must in original condition and send back through the courier. Buyer has to pay for round trip shipping expense.

Feedback

If you have any problem or question,  please tell us your problem in time. And we will do our best to solve the problem and give you a satisfying answer.

If you are satisfied with your purchase, please leave us a positive feedback. After receiving the feedback,we will do the same for you. We both benefits from the positive feedback. Thanks a lot.

Please do not leave a negative feedback before contact me. (leaving negative feedback can't solve the problem). Kindly inform us,We will strive to fulfill bidders satisfaction. 

If you have any problem or question,  please tell us your problem in time. And we will do our best to solve the problem and give you a satisfying answer.

If you are satisfied with your purchase, please leave us a positive feedback. After receiving the feedback,we will do the same for you. We both benefits from the positive feedback. Thanks a lot.

Please do not leave a negative feedback before contact me. (leaving negative feedback can't solve the problem). Kindly inform us,We will strive to fulfill bidders satisfaction.

 Good Luck! Enjoy your bidding !!!
Please contact seller in English