Dual Battery Solar Charge Controller 20Amp ,12/24V auto work,PWM charging mode,Battery types selection,LCD display meter MT-1
Seller Promise:
Get US $5.00 off for single orders greater than US $399.00.
When you purchase more than one item, please add them to the shopping cart to get the discount.
Time remaining for promotion: 10d 20h 6m 56s
Dual Battery Solar Charge Controller 20Amp ,12/24V auto work,PWM charging mode,Battery types selection,LCD display meter MT-1
Duo-battery solar controller
1.Charge dual battery banks
2.For RVs, Caravans, yacht and boats.
3. Remote meter option
Duo-battery Solar Charge Controller with Remote Meter
For RVs, Caravans and Boats.
EPIPDB-COM,10 A ,12V/24 AUTO WORK
Features
Two battery charging eliminates the added cost of two separate solar charging systems
With battery type selection
With charging priority setting
Temperature compensation
(option: Remote temperature senor & Local temperature senor)
PWM charging, different frequency option.
Protection
Over charging
Short-circuit
Reverse polarity revert current to PV
TECHNICAL INFORMATION
Setpoint | Sealed battery | Flooded battery | Gel battery |
Equalization voltage | 14.2V | 14.4V | 14.6V |
Boost voltage | 14.4V | 14.6V | 14.8V |
Float voltage | 13.7V | 13.7V | 13.7V |
Maximum solar voltage | 30V(or 55V) | ||
Battery voltage range | 6-15V | ||
Boost time | 30 minutes | ||
Self-consumption | 4mA at night, 10mA at charging | ||
Meterbus connection | 8-pin RJ-45 | ||
Temp. compensation | -30mV/°C/12V | ||
Terminals | 4mm2 | ||
Temperature | -35°C to +55°C | ||
Remote meter Features
Remote digital display for the 10A/20A Duo- Battery Solar Charge Controller.
Ideal for monitoring and display current solar system status. Displays both solar voltage and battery voltage as well as charging current and load current.
Shows Amp-Hour and Watt-Hour charge accumulation as well as percentage the batteries are charged.
Easy to use and program and is ideal for a quick system check.
Full Digital Display
Displays Voltage, Current, Amp-Hours, Watt-Hours and Percentage Charge
Suitable for both 12V and 24V Systems
Temperature Display
Easy to Use and Set-Up
Full Installation Instructions Included
