CE &UL Approved Solar Pool Heat Exchanger-SP-55K stainless steel 316L

Product Description

This solar pool heat exchangers are compacted shell & tube heat exchanger with high efficiency spiral twisted tubes design.

 

1. Material: full stainless steel (titanium unit is available)

2. Tubes: spiral twisted tubes

3. Connectors: BSPT thread or NPT thread

4. Design pressure: 1.31MPa
5. Design temperature: 208C

5. Surface: polished

6. Mounting bracket is available

7. Special design for boiler or solar water pool heating system.

8. Packing: carton with wooden case.

 

 

Advantages:

1. Increase heat transfer efficiency for water heating
2. Big flow with low pressure drop design suitable for all application.
3. Prevent the fouling on the tube surface.
4.Full titanium construction produces a high anti-corrosion advantage for swimming pool water, sea water, and other solutions with high chlorine concentration.
5. Polish surface has a good feature.
6. Compacted design
7. Durable material constructed

Nominal Performance Table of of Titanium Swimming Pool Heat Exchangers:

Model	Normal Capacity		Pool Capacity
	kW	kBtu/Hr	Gallons@1°F/hr	M3@1°C/hr
SP-55	16	55	4700	32
SP-85	25	85	7300	49.7
SP-155	45	155	13300	90.6
SP-210	60	210	18000	122.6
SP-300	88	300	25800	175.8
SP-360	105	360	31500	214.6
SP-600	175	600	52500	357.7
SP-1200	352	1200	105600	719
SP-2400	704	2400	211200	1438
SP-3000	880	3000	264000	1797.5
SP-3600	1056	3600	316800	2157
SP-4500	1310	4500	396000	2700
SP-5000	1460	5000	439000	3000

Note:

1. For occasional (holidays & weekends) use pools we recommend a 2x output multiplier to obtain a 2°F/hr heat up rate;

2. Nominal values are based on 60°C temperature between incoming heating and heated water.

Typical residential application:

In-floor heating

Swimming pools, spas heating

Driveway snowmelts

 

Typical industrial application:

Oil cooler

Transmission and engine cooler

Boiler sample cooler

Waste water heat recovery