Product Description

1. Introduction

What's In

1 x GSM Main Panel (GSM Sim Card is NOT included)
1 x Siren
1 x Door Gap Sensor(Battery is NOT included)
2 x Remote Control(Battery is NOT included)
1 x PIR Motion Detector(Battery is NOT included)
1 x Power Supply
1 x User Manual

1.1 General Description

This Voice GSM alarm system is suitable for both home and commercial use. It uses the advanced GSM digital signal process technology. This intelligent alarm system is developed on wireless GSM network. It has highly integrated digital voice, SMS, self-learning wireless communication code, remote appliance control and text messaging technologies. The alarm provides automatic voice or SMS message as notifications for incidents. It is a choice of stability, reliability, security, and user friendliness. Features are very practical, cost-effective, completed configuration and ease of use. Six LEDdisplay alarm can integrate with a lot of alarm accessories including door sensor, smoke detectors, gas detectors, emergency buttons and other accessories to build a powerful security setup. It has been widely used in homes, factories, schools, shops, convenience stores, financial and banking workplace, community centre and residential area to provide protection to valuable assets.

1.2 System Features

l Super GSM wireless signals, voice prompt, ease of use.Can install GSM SIM card.

l Allow up to 6 wireless zones and 4 wired zones.

l Each can be defined as one of the 5 zone types including NORMAL, STAY, INTELLIGENT, EMERGENCY, CLOSED.

l Two sets of scheduled arm/disarmed function, each time disarmed you can select the included period of time and different defense zone, eliminating of need of the manual procedure, realizing the beauty of automatic controls.

l Support configuration via phone ( handset ) or SMS messages to System Setup text messaging costs associated with the alarm panel.

l 6 groups voice alarm telephone number, 3 groups for SMS messaging. SMS notification for AC power outage will be sent to 3 groups SMS number and dial the 6th group voice alarm phone number.

l Support ISD automatic voice mailbox for playback message upon alert. Maximum length of voice message is 10 seconds.

l Telephone (phone)/SMS long-distance control for arming, disarming, monitoring, remote announcement.

l 1 Set of normally open signal outputs, relay linkage output, home appliances remote control can be realized.

l Wireless intelligent study coding, compatible with PT2262 normal encoding and a 1527 encoding, convenient and flexible for adding or reducing accessories. Maximum support 50 remote control and 50 sensors.

l Built-in Ni-Hi rechargeable battery and automatically switchable upon power failure, and notification will be sent via SMS.

l Panel integrated with newest either dual-band, triple-band, quad-band GSM/GPRS industrial graded module, adapt to different countries,stable and reliable.

2. Anatomy of the Voice GSM Burglar Alarm System

2.1 System Components and Usage

ARM

The system is at a fully ready status where all detectors are activated in a working state, when the some events ( burglar, fire, gas leak, etc ) happened and detected, , alarm system alarm right away. In a ARM status, the panel [ ARM ] light is on.

To activate using remote control: press [ ARM ] key once.

STAY ARM

This is for partial arming of the alarm system when there are people at home, only some of the selected sensors are activated and could be triggered by events.In a STAY ARM status, the panel [ STAY ] light is flashing.

To activate using remote control: press [STAY] key once.

DISARM

All sensors are deactivated and will not be respond to any events.

In a DISARM status, the panel [ ARM ] light is off.

To activate using remote control: press [DISARM] key once.

EMERGENCY

When an emergency occurs, press the emergency button on the remote control host into the emergency state.

2.2 System Setup

2.2.1 Panel Setup

Alarm panel should be installed at a central location with best transmission to all the wireless sensors and accessories. Keep the panel well away from large metal objects or household appliances with high-frequency interference, and avoid barriers such as concrete walls with metal frame inside and fire doors.

Alarm Panel

2.2.2 SIM Card installation

SIM card installation is simple. Firstly remove the cover of SIM card slot at the back of the alarm panel and then place the card according to direction indicated. Make sure the cover of SIM card slot is fixed suitably.

2.2.3 Summary of Indicators