ZED BULL key programmer [Grass-OBDChina] (zed bull transponder clone,zed bull key maker,car key programmer)

Product Description

Notice:This is Grass-OBDChina.Thanks for choosing the service supported by Grass-OBDChina.There are many supplieres with different qualities for OBD tools on the market now.Please pay attention to choose the best supplier.The following is the description of the product:

ZED BULL key programmer

ZED-BULL key programmer

1- Transponder Cloning: 11, 12, 13, 33, 73, 4C (writing to 4C

electronic key and batteryless TPX1 transponder), Philips Crypto 40

(some), 41(all), 42(all), 44(all unlocked VAG), 45(all), Texas crypto

4D(all 60-61-62-63-64-65-67)to batteryless TPX2 and Silca electronic

heads.

Until now, common transponder cloning tools could only copy fixed

transponders. But the revolution that we started with our device,

Zed-Qx, is increasing with Zed-BULL. 41(for NISSAN), 42(VAG), 44(Unlocked

VAG) and 45(for PEUGEOT) transponders which normally known as can not be

copied, can be copied with Zed-BULL. Also you can copy 4C

transponders onto batteryless TPX1 4C glass transponders.

2- Finding PIN Code, preparing precoded transponders and programming

transponders from EEPROM and MCU. For now, 55 different

applications...

Another revolution of Zed-BULL is programing transponders when there

is no key from ECUs. For now, Zed-BULL has 55 different applications

and it is increasing... With this feature, you can program

transponders, find pin codes and prepare precoded transponders for

the cars which need precoded transponders like for fiat doblo 48. For

this feature, you don’t need expensive precoded transponders priced

about 8-10 Euro. You can use blank transponders...

Zed-BULL PC software’ s excellent features will help you while using

EEPROM applications. ECU pictures, which ECU has which MCU or EEPROM

and the location of mcu or eeprom on the board, which type

transponder will be used... These kind of informations will ease your

work. With Automatic Module Finding (AMF) feature, when you select

the EEPROM file, the module will be recognized automatically.

3- Producing Transponders for OBD Programing.

If you have an OBD device like T-Code Pro, you will need special

precoded transponders for some cars. Instead of buying these special

transponders for high prices, you can produce them with Zed-BULL

using blank transponders. And you don’t need expensive precoded

transponders priced about 8-10 Euro... The transponders that you can

produce: 40, 41, 42, 44 for Mitsubishi, 44 VAG, 45, 73 for Mitsubishi, 61,

62, 65 and 46 for BMW, for AUDI, PORSCHE, for CHRYSLER, for RENAULT... etc. For

now, Zed-BULL has 24 different transponder production applications.

4- Hitag2 Transponder Programmer

If you want to buy a hitag2 programmer as standalone device, you have

to pay around 1000-1500 Euro. But when you have Zed-BULL, you will

get this hitag2