car tire change tools electric jack electric car wrench tire tool auto repair device

Product Description

Electric jack:

Maximum load: 1500kg Rated 
voltage: DC 12V

Current: ≤ 10A 
Power: 120W 
maximum height: 430mm 
Minimum height: 100mm
Net weight: 3.1kg

WRENCH:

Rated voltage: DC 12V 
Current: ≤ 8A

Power: 90W 
Net Weight: 1.5kg

Electric Air Pump:

Maximum pressure: 140PSI 
Flow: 25L/min 
working time :20-30 minutes

Size: 21.5 * 14 * 16.5cm / units 
Net weight: 1.5 kg

Methods of operation]:

1, with the power cord into the car cigarette lighter to take power, if the cigarette lighter is damaged, use the battery clamp onto the battery directly to take power!

2, place the jack under the car placed in the correct position (which can read the car manual), the other end of the power cord into the jack, if the lamp is lit, that means the power, press the down button to lift jack.

3, select the appropriate power cord into the electrical socket and wrench interface

4, choose electric wrench end of the "L" button,

      Unscrew the screws holding down, replaced by a new spare tire, electric wrench end of selection "R" button,

      Tighten the screws holding down, rotating the ring a few times, tighten the ring more than what you can.

5, connect the pump and the tire valve, plug it began to inflate to the pressure required to disconnect the power supply.

6, no power, please use the manual wrench and remove the screw jack lift.

PRECAUTIONS:

1, to avoid damage to the product, the maximum load of 1500kg;

2, before upgrading to ensure the proper jack placement;

3, the jack must be a solid flat surface operation;

4, Do not let the motor water;

5, this jack is only used to change the tire, not for professional service use;

6, to ensure safety, do not make any modification of the product;