Smarter Shopping, Better Living!
led dimmer switch
led dimmer for led lighs
100-230V AC input voltage
IR remote controller or manual
10-100% brightness dimmable
Specification Of led dimmer switch
Triac led dimmer, 100-240V AC voltage input
Part number: EJ-TLD01RF
Dimmer Size: 87mm x 87mm
Gray scale: 256 levels
Input power: 100-240VAC 230v
Frequency: 50~60Hz
Max. load: 300W
Application: LED dimmable lighting (100-240VAC type), traditional dimmalbe light
led dimmer switch
1.Long life, up to 50,000+ hours
2.Significantly reduces maintenance costs
3.Low wattage consumption
4.Electricity consumption reduced 80-90%
5.Vibration resistant, solid state electronic circuitry
6.Internal TVS surge protection
7.Low heat generation saves HVAC operating costs
Trade terms led dimmer switch
1.Payment: T/T in advance,Western Union are welcomed.
2.Reseach and develop by ourselves with good mateirial.
3. Delivered in 3-25days
Our service for led dimmer switch
1.Your inquiry related to our products or prices will be replied in 24hours.
2. Well-trained and experienced staffs to answer all your enquires in fluent English
3. Any your customized lightings we can help you to design and put into product
Application of led dimmer switch
Wall dimmer by IR remote control to dim LED light, Fan
Product name: Triac Dimmer with IR Remote Control
Applications: dim LED light/lamp, CFL light/lamp, Energy Saving Lamp and so on.
Instruction of led dimmer switch
1. Remote control Instructions, as shown in Figure 1
A. Click this button, lights turn on or turn off.
B. Click this button, 100% brightness and stop flash (While flash)
C. These nine buttons correspond to nine level brightness.
D. Click this button, lights are Flash or stop Flash.
E. Click this button, lights flash speed up. (fastest frequency 16Hz)
F. Click this button, lights flash slow down. (slowest frequency 1Hz)
(Size): 86mm x 40mm x 7mm
(Figure 1)
2. Wiring Instructions, as shown in Figure 2
A. AC Input terminal(100~240VAC)
B. AC Load Output terminal(Max. Rated Power 300W)
C. Master Controller
(Size): 87mm x 87mm x 40mm
(Figure 2)
3. Control Panel instructions, as shown in Figure 3
Turn button clockwise rotation, brightness increase gradually.
Turn button to left end, light off.
Turn button to right end, 100% brightness and stop flash (if flash).
(Figure 3)
4. Installation Instructions, as shown in Figure 4

(Figure 4)
5. Additional remarks
Only LED lights can be flash.
Other lights can't be flash, otherwise, the lights would be easily damaged.
(For example, incandescent lamp, CFL, energy-save lamp and so on)
6.Packaging
Cardboard box neutro-packing, 1pcs dimmer and 1pcs remote in.
Packing Box size: 93mm x 105mm x 60mm
G.W: 141g/box
show of led dimmer switch

