Product Description

IP-L180 Operation instruction

Laser  heat transfer paper for light-colour cotton fabric

Suitable for transferring different pattern onto light-colour cotton or cotton-mixed fabrics.

1.      Printing

       For use with any chromatic inkjet using dye or pigment inks.In order to get the satisfactorily printing result, we recommend to use thephoto quality inkjet paper     

Printing pattern onto transfer paper firstly and leave it to dry for about 10 minutes before transferring.     

 Cut out the pattern,leaving a narrow margin of 5mm around the pattern edges.

2.      Transferring

     Pre-heat the pyrography machine still the transfer temperature arrive to 185.degree

      Placing the transfer paper on the fabric so that the pattern face-down.

     Pressing with the pyrography machine about 20 to 30 seconds.

     Transferring uniformly,the best peeling time is 15s later(warm peeling);peeling after cooled is good also(cold peeling).

3.      Washing

      onot wash it within 24 hours after transferring.      Washing the textiles with cool or 30-40 degree water,Donot washing it by bleach and alkaline detergents.avoid powerful cleaning to damage the transferring pattern.

      Donot tumble it for drying,the best way is airing it in a cool place.

       Donot dry-clean.