AT91SAM7X256-EK Evaluation Kit

USB device port,
DBGU serial communication port,
RS232 serial communication port with RTS/CTS,
JTAG/ICE debug interface connector,
serial CAN communication ports(opt),
RMII Ethernet 100-base TX with auto MDIX Capability,
buffered analog input and PWM output(opt),
Power LED and general-purpose LEDs,
DataFlash  card slot,
expansion connector,
Atmel 32 Mbit serial DataFlash  (opt)

Note:Powered by USB port

software

For ADS:

1 ADC: ADC0_AD3 as analog switch

2 AIC:

       1. PIO interrupt test code

       2. IRQ

       3. FIQ interrupt test code

       4. Software

       5. TC interrupt test code

3 CAN: basic test code

4 GPIO: basic GPIO, RSTC test code

       1. IO

       2. Open-circuit output

       3. Parallel output

       4. Pull up control

       RSTC: basic using, key button reset

5 PIT: basic using, for the periodic interrupt

6 PWC: basic using:

       1. Set system clock by PWC

       2. Set each peripherals clock by PWC

       3. Output 4.608MHz by the programmable external clock PCK0 of PWC

       4. To enter the idle mode

7 PWM: basic using, output 6MHz clock by PWM0

8 RTT: basic using, real-time clock value increased by 1 per second, Generate an interrupt

       DBGU: basic using, print RTC value per second via serial port

9 SPI: basic using

       1. Access data of external DATAFLASH CARD - AT45DCB008 by SPI0

       2. Access data of external DATAFLASH CARD - AT45DB321c by SPI0

10 SSC: basic using, configure SSC0 as I2S interface, transfer data between DCA3550

11. TC: basic using, C0, TC1 as 16bit timer

12. TWI: basic using, implement I2C by TWI, access 2-wire EEPROM

13. USART: basic using, configure two USART port and one DBGU port to three USART ports.

PDC: setting

14. USB: basic USB-CDC using, communication with PC by interrupt

15. WDT: basic using

16 UC/OS II example

For IAR

1 ADC: ADC0_AD3 as analog switch

2 AIC:

       1. PIO interrupt test code

       2. IRQ interrupt test code

       3. FIQ interrupt test code

       4. Software interrupt test code

       5. TC interrupt test code

3 CAN: basic test code

4 GPIO: basic GPIO, RSTC test code

       1. IO

       2. Open-circuit output

       3. Parallel output

       4. Pull up control

       RSTC: basic using, key button reset

5 PIT: basic using, for the periodic interrupt

6 PWC: basic using:

       1. Set system clock by PWC

       2. Set each peripherals clock by PWC

       3. Output 4.608MHz by the programmable external clock PCK0 of PWC

       4. To enter the idle mode

7 PWM: basic using, output 6MHz clock by PWM0

8 RTT: basic using, real-time clock value increased by 1 per second, Generate an interrupt

       DBGU: basic using, print RTC value per second via serial port

9 SPI: basic using

       1. Access data of external DATAFLASH CARD - AT45DCB008 by SPI0

       2. Access data of external DATAFLASH CARD - AT45DB321c by SPI0

10 SSC: basic using, configure SSC0 as I2S interface, transfer data between DCA3550

11. TC: basic using, C0, TC1 as 16bit timer

12. TWI: basic using, implement I2C by TWI, access 2-wire EEPROM

13. USART: basic using, configure two USART port and one DBGU port to three USART ports.

PDC: setting

14. USB: basic USB-CDC using, communication with PC by interrupt

15. WDT: basic using

16. MICRONET example: to build web server

17. UC/OS II example

For keil

1BASICTOOLS;

2GPIO;

3HTTPDEMO;

4easyWEB

schematic

PACKING LIST :

7x256-EK Development Kit*1

USB CABLE*1

RS-232 CABLE*1

CD ROM*1