biometric door lock fingerprint lock LCD fingerprint ID

Product Description

biometric  lock  circuit board, LCD, fingerprint  ID lock password lock Control panels circuit boardElectronic, didgital, keypin, card swipe, biometric, locks for safes , high  quelity and lowest  price

Installation is very simple, detailed description

1, buy 4 regular 5 batteries, four screws for fingerprint reader part and four the screws for black metal part.. On the market for sale. for different buyers different thick doors , screw length is different.

2, choose where to install,( first use the black metal part,to find and open a hole for the emergency key, then and another hole for fingerprint readers) , use 4 screws to install fingerprint reader part .  then use 4 screws to install black metal part.

Electronic, didgital, keypin, card swipe, biometric, 

Deya series of stand-alone fingerprint identification module is the introduction of Deya design and manufacturing of small size integrated fingerprint module. To SynoChip high-speed DSP processor core, combined with the company's proprietary optical fingerprint sensor, without host computer in the management of cases, with a fingerprint input, image processing, fingerprint matching, search and template storage functions such as intelligent module. Users can conduct secondary development can be embedded into a variety of end products, such as: access control, attendance, safe, car door locks and so on.

Technique: supplies:

DC 3.6~6.0V

  work Current: 100mA (typical value)

peak value Current: 150mA

refers to enters likely:

Fingerprint image input time: "0.5 seconds

window size: 14  18mm

match the way:

comparison mode (1:1)

search method (1: n)

Feature File: 256-byte

template file: 512 MB

storage capacity: 120

Safety Level: 5 (from low to high: 1,2,3,4,5)

False Accept Rate (FAR): <0.001% (Safety grade 3)

False Reject Rate (FAR): <0.1% (the security level of 3)

 Search time: "1.0 seconds (1:1000, the mean)

host computer interface: UART (TTL logic level) or USB1. 1

Communications baud rate (UART): (9600  N) bps where N = 1 ~ 12 (default value of N = 6, namely, 57600bps)

working environment:

Temperature: -20  C to +40  C

Relative Humidity: 40% RH -85% RH (non-condensing)

Storage Environment: Temperature: -40 C to +85  C

Relative humidity: <85% H (non-condensing)

Dimensions: (LXWXH)

split: Module: 28198.5mm

Fingerprint Sensor: 56 20  21.5mm

 First, the system power-on: Power-on self-test ring"di di" ,system enter standby mode.
Second, fingerprint:

 the first fingerprint: stand-by mode,Press the button, then it will light up the red light, press on the finger tips buzzer, ring  "Di" , raised your finger, waiting for it light red up once again, Press on the same finger, if right acquisition is to Ring a long "Di." its System then continue to wait for the operation or after 10 seconds entering the standby mode automatically. 
  other fingerprint: stand-by mode,Press the button,press the first administrator to conduct fingerprint verification, if validation Successfully , Press the "" Or "" Button, choose to the fingerprint 's storage space, if you choose "02 ~ 03" is the administrator rights, and the rest are General user rights (have no authorized to add or remove any fingerprints), after choose a good space then press "" button to a new fingerprint registration, operating methods is the same as the first fingerprint.
Third, delete fingerprint:
In standby mode,press "" Key, administrator fingerprint to conduct fingerprint verification,if validation Successfully, Press the "" (the front) or "" (Next)to choose delete which fingerprint, then Press "" button to confirm the deletion. (First fingerprint In this menu can not be deleted)
Fourth, how to open or close? 
open: In standby mode, press the "" button, it will light up the red light, press the Registered fingerprint to  authentication, if right ,the indentation latch can be opened door; when the fingerprint system have no Registered  fingerprint, " "button latch automatically after the indent, every user can open the door. (When the latch indent, users within 10 seconds not open door, the latch will pop up automatically re-lock the door)
close: when  the door opened and the system of standby status, press the "" button, the latch will pop up automatically. Or directly related to the Closed door, the latch will pop up automatically.
Fifth, vibration alarm (optional)
open and close vibration alarm: in standby mode, press the "" Button, the screen flashes speakers, press the "" or "" Button to choose the vibration alarm to be pened or closed ( a speaker means opened,a speak with X means closed), when opened if anyone destroy it, it will ring loudly to alarm and show speakers with ")))", after a good choice,do not forget to press "" button to confirm (vibration alarm functions will remain in effect open untill you close it).
  Sixth, remind Low voltage lower
 system uses four 1.5V alkaline batteries, battery full, showed signs of solid battery, if battery voltage lower than 4.5V, when open the door it remind the " Di,Di,Di" three times to tell the users to replace the battery .
if you don’t replace, you can use Emergency key to open. or External power supply
Seven, the system initialization
Press  on the green button for 5 seconds, the system will resume initialization settings, remove all fingerprints.