wireless and wired home security alarm with lower price

home security alarm, wireless and wired alarm

Features:

1.       1-90 LED wireless defense zone , with digital number to show the defense zone, and with keypad on panel.

2.       Can work with 6 wired detectors, and two horns

3.       With Ademco Contact ID protocol, to work with the monitoring station.

4.       Auto-dial six telephone numbers when alarming.

5.       Can set the home arm and away arm functions.

6.       To input the password before operation for home security alarm

7.       Record 10 seconds voice message.

8.       can code 160 wireless detectors in total.

9.       With built-in backup battery, to last 24 hours for power failure.

Installation of door sensors:

Door sensors are used for detecting the status of open and close of windows and doors. It will detect it and send the signal to control panel. Fix the transmitter box and magnet to door case and door. (Youd better fix it again with bolt if you want it fixed strongly.)

Caution:

A Magnet should be close to signal status and make the transmitter box and magnet as close as possible (<10mm).

B. In order to get the best receiving distance, you should pull the antenna and make it upwards

C. If the indicator light of door sensor are still blinking, it shows battery fails. So please replace it as soon as possible.

Installation of PIR detectors

PIR detectors are used for detecting people if someone moves within in a certain place. Fix it on the wall, 22.2meters high and you should adjust the position to make it face to the defense zone. For the PIR detector, pay attention:

1, not face the sunlight

2, not face the big metal

3, not face the air-conditioner or refrigerator, and other code/hot source.

4, not assemble in outdoor side, it is just for indoor

Attention:

a.       Try to install the control unit in the center of defense zone and pull antenna and make it up for getting more wireless receiving distance.

b.       Installation position should be far away with huge metal objects and wireless device.

a.       Connect the trunk line with control panel in order that it can dial out in the first second when there is an alarm.

b.       Should be installed in a shelter.

To judge the LEDs on the main panel:

The LEDs are followings:  power  away  home          alarm  set    cut

When the power LED is on, to mean it is working

When the away LED is on, to mean it is on away arm condition

When the home LED is on, to mean it is on home arm condition

When the alarm LED is on, to mean it is alarming

When the set LED is on, to mean it is on the set condition, if you press the remote control, the system has no any reaction.

When the cut LED is on, to mean it doesnt connect telephone line.

Note :The buyer will bear all risk after the goods tracking information is online by DHL,UPS.FEDEX.TNT ,EMS