12V 10A-30A PWM Electrolyte Controller

Product Description

APPLICATION SCOPE:
For battery-powered low-voltage high-power DC resistive load, as well as the current 3-4A DC Motor.

FEATURES:
1. The efficiency conversion ratio is high
2. Using special low power circuit and power devices, and significantly reduces the drive's own

  power consumption, improve energy efficiency.

PARAMETERS:

1. Input Voltage: DC: 12V 24V (you can make choice)

Rated input voltage: 12V/24V -5% - +10%

(Note: make choice by the short-current double needle selection)

2. Output Voltage: 0-12VDC 0-24VDC

3. Rated output Current: Resistive load 30A; inductive load 6-7A (short time 14A / minute)  

4. speed  regulate signal: Potentiometer 10K / 2W
5. Ambient temperature: 0 - +55 Celsius degree
6. Humidity: Relative humidity ≤ 70RH  

Warning:

This simple controller is missing all the appropriate protection circuit, use only as a simple speed control

No short-circuit protection, no overload, no power connection counter protection,

(Be sure to series matched insurance between the controller's power input and the power, as a protective device)  

Environment: To ensure good ventilation installed in good, dry conditions, do not install the corrosive

gas, dust and other harsh environment conductive,

Please do protect device, do not fall drop the medium with conductive objects or other debris.