Super Car - 1:8 Scale Nitro Race RC Toy

Product Description

Manufacturers Specification

    * Primary Function: 1:8 Scale Nitro Race Car With Pistol Grip Remote Control (220)
    * Features:
      - 1/8 Scale
      - Four disk brake system
      - Powerful shot protection performance
      - Solid steel gears and differential gears
      - Four wheel drive system
      - Backend universal joint
      - Lightweight engine, flywheel & solid universal joint cups
      - Wheel Rims and Cube nailed tread tires
      - High foam element air filter sponge
      - Front and Rear metal sway bars
      - Oiled filled shock absorbers
      - Front Pivot Ball Suspension
      - Front Universal Drive Shafts
      - Complete Ball Bearings
      - Low CG Radio Tray
      - Fully Adjustable Suspension
      - High Torque Steering Servo
      - Spiral Cut Steel Conical Gears
      - Heavy Duty Suspension Arms

    * Technical Parameters:
      - Gear Ratios: 1 : 9.6
      - Engine: 28CXP / 2.4GHz
      - Radio: 2 Channel AM 27MHZ / 2.4GHz
      - 27MHZ CE approved Radio system
      - Solid 6064/T6 anodized solid aluminum chassis
      - Powerful .21 Pull Start Engine
      - Miles or KM Per hour: 80km/ h
      Fuel Tank: 125cc
      Glow Plug Ignite Charge Time: 8-9hours

    * Throttle Onboard Operational Buttons & Indicators:
      - Antenna
      - Steering Trim
      - Throttle Trim
      - Crystal
      - Throttle Trigger
      - LED Working Indicator
      - Power Switch
      - Steering reverse Switch
      - Throttle Reverse Switch

    * Certification: CE, RoHs
    * Dimensions: L:50 x H:11 x W:29.5 (cm) / Tail Gate to floor = 20cm
    * Manufacturers Ref: JF973LI85H96


Product Notes

    * THIS PRODUCT CARRIES A 3 MONTH WARRANTY
    * 2 channel radio system
    * Super fast, please take caution
    * Comprehensively detailed user manual
    * Suspension - Provides quick multi-angle change suitable for any racing surface
    * PERFORMANCE NOTE: Additional gains in steering precision were made by incorporating a pressed-steel bushing, which reduces friction over the entire range of motion, while increasing response time and reducing stress on the throttle remote. The chassis has been extended an additional 2mm to provide increased stability and speed. The chassis tuned flex technology provides significant handling gains by responding precisely to changes in the terrain without sacrificing balance and grip. With updated steering geometry that allows for increased consistency


Package Contents for CVKM-T32

    * 1:8 Scale Nitro Race Car With Pistol Grip Remote Control (220)
    * Remote Control throttle
    * Spare Parts
    * Glow Ignition Plug
    * Power Charger for Ignition plug (220v)
    * Instruction Manual - English




FAQ - Frequently Asked Questions

    * What is the solution if the engine gets flooded
      Remove the glow plug, crank engine so that the excess fuel flows out. It is important as to take care when performing such operations, as the fuel might leak out vertically due to pressure, so keep the area above the engine clear.
    * What should I do if the engine overheats
      Permit the engine to cool down, then gently unscrew the needle valve at 60 degrees and re-start the engine.
    * If the weather is too cold, and the gas powered RC car does not start up, what should I do?
      Turn the valve to 60 degrees and start the engine and let it warm up. After the engine is warmed up turn of the Fuel powered RC car and re-position the valve accordingly, and you should be good to go from there. It’s like warming up an old car if you live in Canada or England and you use the chalk to warm that engine of the car.