2channel car camera video switch for front and rear car camera system
(automatical 20s front view delaying&manual front switch)
Video output: Two videos output, one for car monitor, the other for car DVR.
Front view camera power: supplied by control box system.
Rear view camera power: supplied by control box system, or could be supplied by reverse lamp power.
1.Automatical front view when starting:
When car engine starts, the system will activate the car monitor and the back view camera for 2 seconds,
then turn to front camera to check the front view for 20 seconds, then turn off.
2. Automatically rear view:
When you pull the reverse gear , the system will activate the monitor and rear view camera till the reverse gear back, then switches to front view camera for 20 seconds then shut off.
3. Front view always activate mode:
Press the control switch less than 1 second to enter Front view always activate mode.
In this mode the system will activate monitor and the front view camera always.
To quit the mode,press the control switch less than 1 second again.
Back View>Front View
Press for less than 1 second: Front view mode turn on/ Front view mode turn off.
The system working current: Max: 50MA. (Excludes working current of cameras)
The system working power: 9-12V DC.
System signal: PAL/NTSC
Video output: 1.0VPP/75Ω
Working temperature: -20~80
Operation Temperature: -40~85
Control box * 1pcs
Front view control switch *1pcs
Adapt cable *5pcs
User's manual *1pcs