DIY KIT Technical Data:
I. Cells: 80 pieces 3X6 1.8W solar cells
The standard cell specifications are the following, though the individual cells can be above or below these standards.
1.Average Power (Watts): 1.8Wp
2.Average Current (Amps): 3.6 Imax
3.Average Voltage (Volts): 0.5 Vmax
4.Thickness 200ìm = 0.2 mm
5.Exact Dimension: 3 1/4 inches x 6 inches, or 78 mm by 156 mm
6.Weight: Just above 6 grams or 0.2 oz.
II: Tabbing wires: 80 feet of tabbing wires to connect the solar cells. Cut them into 6 inch sections to solder onto the bus bars on the cells.
III: Bus wires: 8 feet of bus wires. Use them to connect them between the series and connect the tabbing wires ends to the junction box at the back of the panel.
IV: Flux: 1 easy-to-use flux pen that dispenses flux onto the bus bar or your tabbing wires without leaving a mess. It's used to aid soldering and bonding of the wires to the cells. A must have item.
V: Diodes: 2 diodes rated at 6 Amp. Schottky style diode