voltage: 220 v
Power: 2000 w
Hot plate size: 38 * 38 cm
The highest temperature: 399 degree
Time control range: 0-999 seconds
Heating up time (at room temperature - 200 degree) : 10-15 minutes
Realtime display temperature state: when the automatic temperature control, automatic control, automatic alarm
Heat press machine
scope of application: widely used in the surface of the cloth products, textiles, clothing hot drilling, iron tablets, flat backing machine, sublimation, suitable for assembly line or manual work.
The machine features:
1. The heat pipes and heating plate casting as a whole, safe and durable.
2. Automatic and manual work, movement stable, low failure rate.
3. operation is simple, easy to master.
1. Lift the rocker ,machine move toward right.Make the heating plate is completely open.
Plug in the power, open the total power switch, indicator light;
Note: because machine power is High,the whole machine must have appropriate secure protection ground!!!!!!!!!!!
2.Adjust the temperature regulator on the right side (three buttons that represent the bits, 10, one hundred), press + or - to proper temperature (150 -200), the heating time about 10-15 minutes;
3.Adjust the knob on the left side of the timer, attune to the appropriate time (time is decided by different materials)
4.When the temperature reached set value, the machine will be automatically entered into a state of constant temperature;
5. Put sheet on printing table,and then stacked into the picture (photo page size must be bigger than the sheet size, in order to prevent the edges have indentation, affect product final effect), press rocker hard down .
Note: the pressure can not be too large, otherwise will cause deformation of rocker!!!!!!!!!!!
6.Time is up, the buzzer rang when the rocker on, take out the goods