|INBIKE stainless steel insulation Paul ice kettle|
|Black, red , blue|
|750ML 28cm in height , diameter 7cm, diameter 3cm|
|0.32kg (net weight ), with box ( 400 g )|
|Expensive, stainless steel lid of food grade PP plastic / food grade high - strength silicone hanging buckle aluminum alloy|
1,Quality stainless steel, double - high vacuum structure , the insulation effect , the appearance is not frost ; stylish with Carabiner for easy outdoor carry .
Instructions for useIn a clockwise direction : 1 , tighten the lid to prevent leakage , open the lid counter-clockwise rotation ; 2, before using the kettle thoroughly with warm water and neutral detergent cleaning , first with a small amount of hot water preheating , the better the insulation effect can be achieved ; 3 , unused for long periods , please thoroughly clean the containers , and make it fully dry .
Safety Precautions: Costumes beverage or the pressure beverages , first unscrew the lid to release the jug pressure , and then open the lid . 2 Do not place product into the microwave, oven , induction cooker , or open flame heating ; , do not contain dry ice , carbonated beverages , fruit juice or perishable dairy products ; cleaning with a mild neutral detergent Do not use bleach goods chlorine cleaning agents , so as not to damage the product , not run through the dishwasher ; to avoid falling, collision , or a strong impact on , or easily cause product deformation , Diaoqi , affecting the appearance and insulation effect ; 6 , children and adults under the guidance of disabled children , so as not to burn ; 7, the load of water a short period of time Do not drink directly , so as not to burn .
Insulation test, Filled with water at room temperature 20 ° C under the conditions of temperature measured as follows (note that is filled with water , less water will shorten the holding time ) :
An injection temperature of 95 ° C for 6 hours after the temperature of 73 ° C for 12-hour temperature 51 ° C for 18 hours after the temperature of 44 ° C for 24-hour temperature of 37 ° C
Paul ice effect test:
Filled with water at room temperature 20 ° C under the conditions , specifications 750ML , measured temperature as follows (note that is filled with water , less water will be shortened to ensure ice time ) :
A cold effect : a lightweight carry wheatgrass tube
An ambient temperature : 23 -28 water bottle filled with ice to melt completely for the 2 ° C ± ice water , the average time of 6 hours .
2, in an ambient temperature of 21 -25 ° C : water temperature from 4 ° C rose to 16.5 ° C , the average insurance cool for 6 hours .
injected when the temperature of -2 ° C for 3 hours after the temperature 0 ° C 6 hours after the temperature 2 ° C for 9 hours after the temperature 8 12 hours after the temperature is 16
Special Note: 1 , the injection test prior to shipment to ensure that you get the insulation effect good quality products , the kettle inside the remains of a small amount of water , please do not misunderstand , is not used . The camera light and display differences in kind and the picture will have a little color , the product may appear minor scratches on the process of production, transportation , please carefully consider the pursuit of the perfect friend .
Comes mountaineering buckle a