Linsn TS801 LED full color display sending card, used in the synchronous controller system
This Linsn TS801 sending card need to work with the Linsn RV801 receiving card.
And you also need to buy the Hub75 Transfer Board.
And this card is used in the synchronous controller system
y point correction, by card (cabinet)
By point correction support single point, 2X2 points, 4X4 points and 8X8 point four
correction mode, the biggest calibration 6144 points/module, red, green, blue each level of 256.
By card (cabinet) used to display the between the correction of off color correction, red, green,
blue each level of 256.
LED studio 10.0
Long distance transmission
Maximum transmission 170 meters (measured), ensure transmission 140 meters.
Receiving card integration test function, need not take send card can test display, slash,
gray, red, green, blue, and the light, etc many types test mode.
Break the traditional ideas without
dial code switch
No dial code switch design, all Settings through the computer.
256 level automatically
A level 256 automatic adjustment function make display brightness adjustment more effective.
65536 level (64 K) gray arbitrary
According to the situation of display customers can arbitrarily set from no gray to level
65536 (64 K), make your screen to achieve the best display effect.
Intelligent identification card
Intelligent identification procedures can identify double color, full color, virtual, lighting,
etc all kinds of various drivers board scanning mode and various kinds of signal , recognition rate reached 99%.
Full color 4096(4K) gray level 180HZ refresh rate,max controls 512*128,twice than the sixth
generation product,full color static 16384(16k)gray level 300HZ,max controls 160*64(note:need driving
board can be on high 30MHZ clock)
The refresh rate arbitrary setting,
phase lock, synchronization function
set arbitrarily from 10 Hz refresh rate-3000 Hz, phase lock function to make the screen refresh
lock the computer monitor refresh rate in integer times, put an end to the image rent, ensure perfect
image reappearance. Phase lock synchronous range of 47 Hz-76 Hz.
Double cable heat backup function
The A and B two ports of receiving card can be used to input or output, can be used for
two computers to control a screen at the same time, when one computer have problems, another one
automatically replace it, also can be used for one computer with double cable control, when one cable
have problems, another one automatically take it over, making the normal work of screen to get maximum security.
Program online upgrade function
If the screen receiving card program needs to be upgraded, need to open display power and update
through the LED studio, no need to detach receiving card from the display.
Many screens synchronization and
Support a piece of sending card controlling pieces screens, the working state of screens
can be arbitrary combination, synchronous
display, independent broadcasting, can be through the shortcut key, fast switching.