Home > All Categories > Home Improvement > Hardware > Adhesives & Sealers >


ZHANLIDA E6000 Industrial Strength Super Adhesive Clear Liquid E-6000 Glue Diy Phone Case Crafts Pearls Jewelry Rhinestones

US $1.50
US $2.58 -42%

Buyer Protection

Money Back Guarantee Refund in 15 Days

Review by Rxxxs (BR)
This was another good purchase! The seller is realiable, the product is good and the delivery and shipment is fast! Foi uma ótima compra!

what diferens 6000 7000 8000?

не пришло

View all 1 Questions & Answers


Item specifics

  • Type: Caulk
  • is_customized: Yes
  • Model Number: E6000
  • Brand Name: ZHANLIDA
Product Description
  3. Category : Needles-Style Glue.
  4. Manufacturing Date : See The Outer Packing.
  5. Shelf Life : 2 Years.
  6. Volume : 25 ml.




  1. Please read all directions before using.
  2. Surface should be clean,dry and free of dirt.Roughen surface before each use.
  3. Puncture seal in neck of tube using pointer cap.
  4. Test small area before full use.
  5. Best when used between 70°F and 85°F.
  6. Cure time increases with lower tepmperatures.
  7. For maximum-strength bond,allow 24-72 hour dry time.
  8. For joining non-porous surfaces,apply a thin coat to each surface.Wait 2-10 minutes and press surfaces together.
  9. Clean uncured adhesive with acetone or citrus-based solvents.Cured material may be removed by cutting or scraping.

Recommended stores

E6000 intensity products, general product's versatility

E8000 high strength adhesive soft cloth, earbuds Accessories
T8000 high strength, general purpose wide range of products
E7000 high intensity, diamond paste, plastic, small metal suitable products



DIY handmade transparent soft glue, the product is not corrosive, have a certain consistency, 

will not dilute like water, and made the products are glue before the glue is not completely

cured, it can easily erase, not leaving no trace, not like 502 glue, it will have serious flow

outside the rub whitening are indelible, 3-5 minutes to glue fixed during this period can have

enough time to adjust the position, 24-48 hours glue the highest intensity.


Capacity: 25ml

Glial: transparent, flexible plastic, semi-solid
Features: non-white, non-brittle, non-yellowing, not stiff, ultra-drawing, no odor.
Colloid: B-7000 B-6000 than dilute glue glue
Comparison of concentration: B-6000 (4500CPS)
B-7000 (2800CPS)
E8000 (3800CPS)
15ml / pcs, 100 / box, 1200 / box 50ml / support, 15 / box, 360 / box




E6000 is a self-leveling adhesive meets toys, stones, all kinds of decorations, flowers, jewelry.
Special environmental protection and other industries bonding glue crafts, compared with other
adhesives, B-7000 pungent odor but also tiny Dan Dan FRESH fragrance; belonging to the new one-
component transparent solution glue, room temperature curing, easy to operate without having to re
Aliquot, both openings having a high elastic film soft, anti-vibration and waterproof.
E6000 paste adhesive can be more material on metals, glass, ceramics, stone, bamboo wood, cloth, 
leather, PVC, ABS, nylon, sponge, film, textiles, electronic components, plastics, rubber, fiber class,
sheet, cell phone stickers border, LCD screen, in the box, and other materials have a very good
paste properties.
iphone4 4S 5G-generation Samsung mobile phone LCD touch screen frame in the frame holder glue
LCD screen, and then paste the frame border use: tilt the phone to get some of the crevices, bracket, or border. Press tight, probably would have done a few minutes, more out of a can with an alcohol wipe went. Very easy to use, with good results.
Features: colorless, tasteless, non-bleaching, gently rubbing alcohol, it can perfectly remove excess glue. Bad first installed, you can drop points alcohol can also be easily removed again came in.
Special note attached LCD screen and the phone box and frame bracket: Before use, please do get small portions under test, in order to correct a positive grip method has been used in an amount, by hair dryer or heat gun is heated, it will accelerate the curing effect.
Technical data
Solid content: 33% -35%
After curing Hardness: 70-85A
Surface drying time: 2 minutes to 5 minutes Location
Full cure time: 24-48 hours
Storage: stored at 10 degrees to 28 degrees
Net content: 25ML
1, before using the product, please read the instructions carefully introduced.
2, in front of a large area, a small area first to make experiments.
3. Make sure that the sticky surface cleaning and drying.
4, the best temperature should be between 18-32 degrees.
5, the product can be directly lid on demand evenly coated on the surface of the adherend.
6, wait 3-6 minutes, the two adherends aligned adhesive little pressure.
7, you can put straight hours, 48 hours after the optimum adhesive strength.
8, when the product is not glue the caps Shanghao avoid contact with air curing.
1, may be irritating o the skin and eyes.
2 Use in a well-ventilated environment.
3. In case of contact with eyes rinse with plenty of water.
4, please store away from children, the production operation, please keep away from fire.
5, shelf life of 1 year after the date see the safe use of the product bottle.




  • 5 Stars 86%
  • 4 Stars 7%
  • 3 Stars 3%
  • 2 Stars 1%
  • 1 Star 3%
4.7 / 5

View all 99 reviews