Home > All Categories > Tools > Measurement & Analysis Instruments > Electrical Instruments >

Voltage Meters

DC 48V Acid Lead Battery Indicator Lithium Battery Capacity Red LED Display Tester DC Voltmeter Analyzer for Car E-bike Voltage

US $3.84
US $6 -36%

Buyer Protection

Money Back Guarantee Refund in 15 Days

PRODUCT DETAILS

Item specifics

  • Display Type: Digital Only
  • Dimensions: 48*29*21 mm
  • Accuracy Class: 1% +/- 2 digits
  • Brand Name: YB
  • Operating Temperature: -10 to +50 degrees
  • DIY Supplies: Electrical
  • Power Supply: DC
  • Model Number: YB27VE
  • Working Pressure: 80 ~ 106kPa
  • Working Current: < 20mA
  • Measurement Rate: More than 500mS/ times
  • Voltage: DC48V
  • Battery type: Lead-acid/Lithium
  • Mounting hole: 47.2*27.3mm
  • Display type: LED with red digits
  • Function: Test battery voltage and capacity
Product Description

DC 48V Acid Lead Battery Indicator Lithium Battery Capacity Red LED Display Tester DC Voltmeter Analyzer for Car E-bike Voltage Meter

buyer

This tester for Lithium and lead-acid batteries Universal ,the factory default setting for 12V lead-acid battery power and voltage cycle display,If you need to test other specifications can be re-set by yourself.

 

information

Description:

  • The screen can display voltage, percentage of electricity at the same time.(Note: these three can be switched by the key.)
  • Can measure adjustable voltage range of 6-120V.(Lead-acid battery 12V for this item)
  • Suitable for lithium battery and lead-acid battery.

 

Setting Mode:

  • Power on( red for + and black for -)
  • Press a few seconds to setting mode: from 1-U, 2-b, 3-C to 4-d.
    • 1-U:Voltage calibration
    • 2-b:Setting battery type
    • 3-C:Setting number of battery
    • 4-d:Setting "showing mode"

 

1-U:Voltage calibration:

While on 1-U, press the button to enter into voltage calibration mode, release it and press again, voltage will be step-up adjusted; release the button and then press it to step-down adjust; Repeat adjust and save the setting while the screen flash and exist setting.

 

2-b:Adjust battery type:

  • While on 2-b, press the button to change the type of battery press one by one will showed: 1.2V__2V__3.2V__3.7V__12V ( While adjust to appropriate battery type, release the button, save and exist setting when the screen flashing.)
    • 1.2V:Ni-MH battery, each battery 1.2V
    • 2 V:Lead-acid battery, each battery 2V
    • 12 V:Lead-acid battery, each battery 12V
    • 3.7V:Polymer lithium battery, each battery 3.7V
    • 3.2V:Lithium iron phosphate battery, each battery 3.2V  

 

3-C:Setting number of batteries:

  • While on the "3-C" setting, press the button to enter into setting number of batteries.
  • Release the button and press again, value will be step-up adjusted; release the button and then press it to step-down adjust; Repeat adjust to appropriate number of batterie
  • Different range for different type batteries:
    • 12V Lead-acid battery: 1-10 sections
    • 3.7V Lithium battery: 2-28 sections
    • 3.2V Lithium ion battery: 2-32 sections
    • 2V Lead-acid battery: 3-60 sections
    • 1.2V NI-MH battery: 10-70 sections
  • Adjust to appropriate mode, save the setting while the screen flash and exist setting

 

4-d:Setting showing mode

  1. While on "4-d", press the button to enter into setting showing mode.
  2. Release the button, press it once showed one mode: V is voltage, % is percentage of power.
  3. save the setting while the screen flash and exist setting.(these two will be in cyclic display)
  4. Adjust to appropriate mode, save the setting while the screen flash and exist setting

 

Samples for Setting:

TIM20190115160250

  

spcification

  • Voltage measuring range: DC6~120V (wide range),the maximum input voltage can not exceed 120V
  • Test voltage: DC6~120V (decimal point automatic shift)
    1. The minimum resolution below 100V: 0.1V
    2. The minimum resolution of 100V: 1V
  • Energy Resolution: 1%
  • Working current: < 20mA
  • Screen Display: LED
  • Exterior dimension: L54 x W30 x H21mm
  • Opening hole for installing: 47.2 x 27.3mm
  • measurement rate: more than 500mS/ times
  • Voltage measurement accuracy: 1% (+/-2 digits)
  • Lead length: >150mm
  • Minimum supply voltage: +6V
  • Maximum power supply voltage: +120V
  • Operating temperature: -10°c ~ +50°c
  • Working humidity: 10 ~ 80% (no condensation)

 

           

 

           

show

YB27VE-24V

 

YB27VE-10YB27VE-9YB27VE-2YB27VE-5

 

 

YB27

Buyers show:

YB27VE_ExampleGraph_A

YB27VE_ExampleGraph_AA

YB27VE_ExampleGraph_BBYB27VE_ExampleGraph_B

YB27VE_ExampleGraph_C

 

 

service

YOU MAY ALSO LIKE