Home > All Categories > Tools > Measurement & Analysis Instruments > Electrical Instruments >

Voltage Meters

DC48V Lead-acid Lithium Battery LED Voltmeter Meter Battery Capacity Tester Indicator Monitor Analyzer E-bike Car 48V Motocycle

US $4.48
US $7 -36%

Buyer Protection

Money Back Guarantee Refund in 15 Days

PRODUCT DETAILS

Item specifics

  • Operating Temperature: -10 to +50Degrees
  • Display Type: Digital Only
  • Dimensions: 48*29*21 mm
  • Accuracy Class: 1% +/- 2 digits
  • Brand Name: YB
  • DIY Supplies: Electrical
  • Model Number: YB28VE-W
  • Power Supply: DC
  • Working Pressure: 80 ~ 106kPa
  • Battery Type: Lead-acid / Lithium
  • Mounting Hole: 47.2*27.3mm
  • Voltage : DC48V
  • Working Current: < 20mA
  • Measurement Rate: More than 500mS/ times
  • Feature: Waterproof
Product Description

DC48V Lead-acid Lithium Battery LED Voltmeter Meter Battery Capacity Tester Indicator Monitor Analyzer E-bike Car 48V Motocycle 

buyer

This tester for Lithium and lead-acid batteries Universal ,the factory default setting for 12V lead-acid battery power and voltage cycle display,If you need to test other specifications can be re-set by yourself.

information

  • Suitable for lithium battery and lead-acid battery.
  • The screen can display voltage, percentage of electricity at the same time.(Note: these three can be switched by the key.)
  • Can measure adjustable voltage range of 6-120V.( Lead-acid battery 12V for this item)
  • Waterproof and easy to connect with only two wires  

 

Setting Mode:

  1. Power on( red for + and black for -)
  2. Press a few seconds to setting mode: from 1-U, 2-b, 3-C to 4-d.
    • 1-U:Voltage calibration
    • 2-b:Setting battery type
    • 3-C:Setting number of battery
    • 4-d:Setting "showing mode  

 

1-U:Voltage calibration:

While on 1-U, press the button to enter into voltage calibration mode, release it and press again, voltage will be step-up adjusted; release the button and then press it to step-down adjust; Repeat adjust and save the setting while the screen flash and exist setting.

 

2-b:Adjust battery type:

  • While on 2-b, press the button to change the type of battery press one by one will showed: 1.2V__2V__3.2V__3.7V__12V ( While adjust to appropriate battery type, release the button, save and exist setting when the screen flashing.)
    • 1.2V:Ni-MH battery, each battery 1.2V
    • 2 V:Lead-acid battery, each battery 2V
    • 3.2V:Lithium iron phosphate battery, each battery 3.2V
    • 3.7V:Polymer lithium battery, each battery 3.7V
    • 12 V:Lead-acid battery, each battery 12V  

 

3-C:Setting number of batteries:

  1. While on the "3-C" setting, press the button to enter into setting number of batteries.
  2. Release the button and press again, value will be step-up adjusted; release the button and then press​ it to step-down adjust; Repeat adjust to appropriate number of batteries.
  3. Different range for different type batteries:
    • 12V Lead-acid battery: 1-10 sections
    • 3.7V Lithium battery: 2-28 sections
    • 3.2V Lithium ion battery: 2-32 sections
    • 2V Lead-acid battery: 3-60 sections
    • 1.2V NI-MH battery: 10-70 sections
  4. Adjust to appropriate mode, save the setting while the screen flash and exist setting  

 

4-d:Setting showing mode

  1. While on "4-d", press the button to enter into setting showing mode.
  2. Release the button, press it once showed one mode: V is voltage, % is percentage of power( these two will be in cyclic display)
  3. Adjust to appropriate mode, save the setting while the screen flash and exist setting.

 

Samples for Setting:

HTB17VV4aUvrK1RjSszfq6xJNVXaW

 

Technical Parameters:

  • Voltage measuring range: DC6~120V (wide range),the maximum input voltage can not exceed 120V
  • Test voltage: DC6~120V (decimal point automatic shift)
    1. The minimum resolution below 100V: 0.1V
    2. The minimum resolution of 100V: 1V
  • Energy Resolution: 1%
  • Working current: < 20mA
  • Screen Display: LED
  • Exterior dimension: L54 x W30 x H21mm
  • Opening hole for installing: 47.2 x 27.3mm
  • measurement rate: more than 500mS/ times
  • Voltage measurement accuracy: 1% (+/-2 digits)
  • Lead length: >150mm
  • Minimum supply voltage: +6V
  • Maximum power supply voltage: +120V
  • Operating temperature: -10°c ~ +50°c
  • Working humidity: 10 ~ 80% (no condensation) 

 

show

 

 

YB28VE-W-48V

YB28VE-W-5

YB28VE-W-3YB28VE-W-1

YB28VE-W-4YB28VE-W-6YB28VE-W-7

 

YB28VE_Gif_1SYB28VE-W-9YB28VE-W-8

 

YB28

 

 

Buyers' show:

YB27VE_ExampleGraph_A

YB27VE_ExampleGraph_AA

YB27VE_ExampleGraph_BBYB27VE_ExampleGraph_B

YB27VE_ExampleGraph_C

 

 

service

YOU MAY ALSO LIKE