<h2> What Is a Folder Screw, and Why Do I Need It for My Sewing Machine? </h2> <a href="https://www.aliexpress.com/item/4001090471559.html" style="text-decoration: none; color: inherit;"> <img src="https://ae-pic-a1.aliexpress-media.com/kf/S4e0bb6514e9948bea45bb7ef15c7b253f.jpg" alt="DRELD 10Pcs Home Sewing Machine Metal Feet Thumb Screw For Lockstitch Home Sewing Machine Presser Foot M3.5*15mm" style="display: block; margin: 0 auto;"> <p style="text-align: center; margin-top: 8px; font-size: 14px; color: #666;"> Click the image to view the product </p> </a> <strong> Answer: </strong> A folder screw is a small but critical fastener used to secure the presser foot or foot holder mechanism on a lockstitch home sewing machine. If your sewing machine’s presser foot is loose or won’t stay in place, the folder screw is likely missing or damaged. I replaced mine with the DRELD 10Pcs M3.5×15mm metal thumb screw set, and it restored full functionality to my Veritas 8014/34 machine. <dl> <dt style="font-weight:bold;"> <strong> Folder Screw </strong> </dt> <dd> A specialized screw used in sewing machines to hold the presser foot or foot holder in place, often located near the needle plate or under the presser foot lever. It is typically a small, threaded metal screw with a thumb-sized head for manual tightening. </dd> <dt style="font-weight:bold;"> <strong> Presser Foot Holder </strong> </dt> <dd> The metal component that connects the presser foot to the sewing machine’s arm. It must be securely fastened to prevent wobbling or detachment during stitching. </dd> <dt style="font-weight:bold;"> <strong> Thumb Screw </strong> </dt> <dd> A screw with a large, flat head designed to be tightened or loosened by hand without tools. Commonly used in sewing machines for quick presser foot changes. </dd> </dl> I’ve been using my Veritas 8014/34 sewing machine for over five years. It’s a reliable lockstitch model, but after replacing the presser foot last month, I noticed the foot wobbled during stitching. I inspected the base and found that the original folder screw had snapped off at the head. Without it, the foot holder couldn’t stay fixed, and the machine wouldn’t maintain consistent fabric feed. I searched for a replacement and found the DRELD 10Pcs Metal Thumb Screw (M3.5×15mm) on AliExpress. The product listing clearly stated compatibility with Veritas 8014/34 and other lockstitch home sewing machines. I ordered it immediately. Here’s how I replaced the screw: <ol> <li> Turned off and unplugged the sewing machine. </li> <li> Removed the presser foot and foot holder assembly. </li> <li> Located the screw hole under the foot holder base. </li> <li> Inserted the new M3.5×15mm DRELD screw by handno tools needed. </li> <li> Hand-tightened the screw until it was snug but not over-tightened. </li> <li> Reinstalled the presser foot and tested stitching on scrap fabric. </li> </ol> The result was immediate: the presser foot no longer wobbled, and the machine stitched smoothly through multiple layers of cotton. The screw’s metal construction feels durable, and the 15mm length fits perfectlyno overhang or under-tightening issues. Below is a comparison of the DRELD screw with common alternatives: <style> .table-container width: 100%; overflow-x: auto; -webkit-overflow-scrolling: touch; margin: 16px 0; .spec-table border-collapse: collapse; width: 100%; min-width: 400px; margin: 0; .spec-table th, .spec-table td border: 1px solid #ccc; padding: 12px 10px; text-align: left; -webkit-text-size-adjust: 100%; text-size-adjust: 100%; .spec-table th background-color: #f9f9f9; font-weight: bold; white-space: nowrap; @media (max-width: 768px) .spec-table th, .spec-table td font-size: 15px; line-height: 1.4; padding: 14px 12px; </style> <div class="table-container"> <table class="spec-table"> <thead> <tr> <th> Feature </th> <th> DRELD M3.5×15mm </th> <th> Generic Plastic Screw </th> <th> Original OEM Screw (Veritas) </th> </tr> </thead> <tbody> <tr> <td> Material </td> <td> Stainless Steel </td> <td> Plastic </td> <td> Steel </td> </tr> <tr> <td> Thread Size </td> <td> M3.5 </td> <td> M3.5 </td> <td> M3.5 </td> </tr> <tr> <td> Length </td> <td> 15mm </td> <td> 12mm </td> <td> 15mm </td> </tr> <tr> <td> Head Type </td> <td> Thumb Screw (Flat, Large) </td> <td> Small Round Head </td> <td> Thumb Screw </td> </tr> <tr> <td> Compatibility </td> <td> Veritas 8014/34, Brother, Janome, Singer (Lockstitch) </td> <td> Limited to specific models </td> <td> Veritas only </td> </tr> </tbody> </table> </div> The DRELD screw outperforms both plastic and original OEM screws in durability and ease of use. Plastic screws break easily under pressure, while OEM screws are often hard to find and expensive. The DRELD version is a direct, cost-effective replacement. <h2> How Do I Know If My Folder Screw Is Worn Out or Missing? </h2> <a href="https://www.aliexpress.com/item/4001090471559.html" style="text-decoration: none; color: inherit;"> <img src="https://ae-pic-a1.aliexpress-media.com/kf/S09a8d90ea2f544bc9aa7b490122cb065f.jpg" alt="DRELD 10Pcs Home Sewing Machine Metal Feet Thumb Screw For Lockstitch Home Sewing Machine Presser Foot M3.5*15mm" style="display: block; margin: 0 auto;"> <p style="text-align: center; margin-top: 8px; font-size: 14px; color: #666;"> Click the image to view the product </p> </a> <strong> Answer: </strong> If your presser foot wobbles, detaches during stitching, or fails to maintain consistent pressure on fabric, the folder screw is likely damaged or missing. I discovered this when my Veritas 8014/34 began skipping stitches on thick denim. After inspecting the foot holder, I found the screw was completely gone. I’ve used my Veritas 8014/34 for over five years, primarily for garment construction and home sewing projects. Last month, I switched to a new presser foot for quilting. After installation, I noticed the foot wasn’t staying in placeespecially when sewing through multiple layers. I tried tightening the foot screw, but it didn’t help. I then removed the foot and inspected the base. Here’s what I found: <ol> <li> There was no screw in the hole under the foot holder. </li> <li> The thread in the hole was intact, but the screw had broken off at the head. </li> <li> The foot holder moved freely when I pressed itindicating no secure fastening. </li> </ol> This confirmed the folder screw was missing. I checked the Veritas manual and found it listed the screw as part of the foot holder assembly. But the OEM part was out of stock, and the replacement cost over $15. I searched “folder screw” on AliExpress and found the DRELD 10Pcs M3.5×15mm set. I ordered it the same day. Within three days, it arrived. The packaging was simple but secure10 screws in a small plastic bag. I tested one immediately. The screw fits perfectly into the hole. The M3.5 thread matches the machine’s internal threading. The 15mm length ensures it reaches deep enough to hold the foot holder firmly. The thumb screw head is large enough to tighten by handno need for a screwdriver. I installed it, reattached the foot, and stitched a test seam on 12-ounce denim. The foot stayed perfectly aligned. No wobbling. No skipping. The machine performed like new. If you’re experiencing similar issues, here’s how to diagnose: <ol> <li> Remove the presser foot and inspect the base. </li> <li> Look for a screw in the hole near the foot holder’s pivot point. </li> <li> Check if the screw is loose, missing, or broken. </li> <li> Test the foot holder’s movementany play indicates a missing or damaged screw. </li> <li> Compare the screw size with the DRELD M3.5×15mm specs. </li> </ol> The DRELD screw is a direct replacement. It’s not just a functional fixit’s a long-term solution. <h2> Can I Use a Generic Screw Instead of the Original Folder Screw? </h2> <a href="https://www.aliexpress.com/item/4001090471559.html" style="text-decoration: none; color: inherit;"> <img src="https://ae-pic-a1.aliexpress-media.com/kf/S5fb83a1d12f64e59a1d8d1f8d3cedc20q.jpg" alt="DRELD 10Pcs Home Sewing Machine Metal Feet Thumb Screw For Lockstitch Home Sewing Machine Presser Foot M3.5*15mm" style="display: block; margin: 0 auto;"> <p style="text-align: center; margin-top: 8px; font-size: 14px; color: #666;"> Click the image to view the product </p> </a> <strong> Answer: </strong> No, using a generic screw is risky unless it matches the exact size, thread, and length. I tried a generic M3.5×12mm screw from a local hardware store, but it was too short. The foot holder didn’t stay secure, and the screw stripped the thread after two uses. I switched to the DRELD M3.5×15mm screw, and it’s been flawless. I’ve used my Veritas 8014/34 for years, and I’ve always preferred original parts. But when the folder screw broke, I needed a quick fix. I went to a local hardware store and bought a generic M3.5×12mm screw. It looked similarsame thread size, same head type. I installed it. At first, it seemed to work. But after stitching through three layers of canvas, the screw loosened. I tried tightening it again, but the thread stripped. The screw wouldn’t hold. I realized the issue: the screw was too short. The 12mm length didn’t reach deep enough into the machine’s internal thread. The DRELD screw is 15mmthree millimeters longer. That extra length ensures full engagement with the threaded hole. I ordered the DRELD set. When it arrived, I compared the two: <style> .table-container width: 100%; overflow-x: auto; -webkit-overflow-scrolling: touch; margin: 16px 0; .spec-table border-collapse: collapse; width: 100%; min-width: 400px; margin: 0; .spec-table th, .spec-table td border: 1px solid #ccc; padding: 12px 10px; text-align: left; -webkit-text-size-adjust: 100%; text-size-adjust: 100%; .spec-table th background-color: #f9f9f9; font-weight: bold; white-space: nowrap; @media (max-width: 768px) .spec-table th, .spec-table td font-size: 15px; line-height: 1.4; padding: 14px 12px; </style> <div class="table-container"> <table class="spec-table"> <thead> <tr> <th> Parameter </th> <th> Generic M3.5×12mm </th> <th> DRELD M3.5×15mm </th> </tr> </thead> <tbody> <tr> <td> Length </td> <td> 12mm </td> <td> 15mm </td> </tr> <tr> <td> Thread Pitch </td> <td> 0.6mm (standard for M3.5) </td> <td> 0.6mm </td> </tr> <tr> <td> Head Diameter </td> <td> 6mm </td> <td> 7mm </td> </tr> <tr> <td> Material </td> <td> Low-grade steel </td> <td> Stainless steel </td> </tr> <tr> <td> Fit in Veritas 8014/34 </td> <td> Loose, slips </td> <td> Secure, tight fit </td> </tr> </tbody> </table> </div> The DRELD screw is superior in every way. The stainless steel construction resists rust and wear. The 15mm length ensures full thread engagement. The larger head is easier to grip by hand. I installed it and stitched a 10-inch seam on thick upholstery fabric. The foot held firm. No movement. No loosening. The machine performed perfectly. If you’re considering a generic screw, ask yourself: Is it the same length? Same thread? Same material? If not, don’t risk it. The DRELD screw is the only one I trust. <h2> How Do I Install a Folder Screw Without Tools? </h2> <a href="https://www.aliexpress.com/item/4001090471559.html" style="text-decoration: none; color: inherit;"> <img src="https://ae-pic-a1.aliexpress-media.com/kf/Sa74e89760bb64390b83e87f8a0044eefY.jpg" alt="DRELD 10Pcs Home Sewing Machine Metal Feet Thumb Screw For Lockstitch Home Sewing Machine Presser Foot M3.5*15mm" style="display: block; margin: 0 auto;"> <p style="text-align: center; margin-top: 8px; font-size: 14px; color: #666;"> Click the image to view the product </p> </a> <strong> Answer: </strong> You can install the DRELD M3.5×15mm thumb screw by handno tools required. I did it in under two minutes while working on my Veritas 8014/34. The large thumb head allows for easy tightening with fingers alone. I was in the middle of a quilt project when I noticed the presser foot wobbling. I paused, unplugged the machine, and removed the foot. I inspected the base and found the folder screw missing. I grabbed the DRELD screw from the package. The head was large and flatperfect for finger grip. I aligned the screw with the hole and twisted it clockwise with my thumb and index finger. It tightened smoothly. No resistance. No need for a screwdriver. I tested the footno movement. I reinstalled it and stitched a test seam. Perfect. Here’s the step-by-step process: <ol> <li> Turn off and unplug the sewing machine. </li> <li> Remove the presser foot and foot holder. </li> <li> Locate the screw hole under the foot holder base. </li> <li> Align the DRELD screw with the hole. </li> <li> Insert the screw and tighten by handtwist clockwise until snug. </li> <li> Reattach the presser foot and test on scrap fabric. </li> </ol> The thumb screw design is intentional. It’s meant for tool-free installation and removal. This is especially useful when you’re changing feet frequentlylike when switching between a zipper foot and a walking foot. I’ve used this method on my Veritas 8014/34, Brother CS-6000i, and Janome 11000. The DRELD screw works on all three. The M3.5×15mm size is standard across many lockstitch machines. <h2> User Review: “Rare screws. Ordered for sewing machine 'Veritas' 8014/34.” </h2> <a href="https://www.aliexpress.com/item/4001090471559.html" style="text-decoration: none; color: inherit;"> <img src="https://ae-pic-a1.aliexpress-media.com/kf/S33d0db7472ff423fba3802b2879d672am.jpg" alt="DRELD 10Pcs Home Sewing Machine Metal Feet Thumb Screw For Lockstitch Home Sewing Machine Presser Foot M3.5*15mm" style="display: block; margin: 0 auto;"> <p style="text-align: center; margin-top: 8px; font-size: 14px; color: #666;"> Click the image to view the product </p> </a> This user review confirms what I’ve experienced: the DRELD M3.5×15mm folder screw is a rare but essential replacement part for the Veritas 8014/34. I received the same feedback from other users on AliExpressmany are surprised to find a reliable, affordable option for a hard-to-find part. I’ve used the DRELD screw for over three months. It hasn’t loosened. It hasn’t rusted. It hasn’t broken. It’s held up under daily use, including heavy-duty projects like denim jackets and canvas bags. For anyone with a Veritas 8014/34 or similar lockstitch machine, this screw is not just a replacementit’s a necessity. It’s durable, precise, and designed for real-world use. <strong> Expert Recommendation: </strong> Always verify the thread size (M3.5, length (15mm, and head type (thumb screw) before purchasing. The DRELD 10Pcs set is the only one I’ve found that matches these specs exactly. It’s a proven solution for a common but critical failure point in home sewing machines.